| Diagnostic | Description |
|---|
|
a3500fctest(1M) |
In-band diagnostic for Sun StorEdge A3500FC LUNs attached via the host data-path.
|
|
a5ksestest(1M) |
In-band diagnostic for Sun StorEdge A5000 Enclosures attached via the host data-path. |
|
a5ktest(1M) |
In-band diagnostic for Sun StorEdge A5000 disk drives attached via the host data-path. |
|
brocadetest(1M) |
Out-of-band diagnostic for testing ports on Brocade Silkworm Fibre Channel switch. |
|
d2disktest(1M) |
SCSI disk diagnostic for Sun StorEdge D2 SCSI disks. |
|
daksestest(1M) |
In-band diagnostic for Sun Fire V880 Enclosures attached via the host data-path. |
|
daktest(1M) |
In-band diagnostic for Sun Fire V880 disk drives attached via the host data-path. |
|
fcdisktest(1M) |
In-band diagnostic for Internal FC disk drives attached via the host data-path. |
|
fctapetest(1M) |
In-band diagnostic for FC Tape drives attached via the host data-path. |
|
ifptest(1M) |
Sun StorEdge PCI FC-100 Host Bus Adapter diagnostic for HBAs using the ifp driver |
|
qlctest(1M) |
Sun StorEdge PCI Dual Fibre Channel Host Bus Adapter diagnostic for HBAs using the qlc driver. |
|
socaltest(1M) |
Sun StorEdge SBus FC-100 Host Bus Adapter diagnostic for HBAs using the socal driver. |
|
linktest(1M) |
The linktest is designed to test two end points of a FC link segment
and assist the user in FRU isolation of the link segment. This test is typically run when the FCAL topology indicates a link problem. i.e. A red link. |
|
switchtest(1M) |
Out-of-band diagnostic for testing ports on Sun StorEdge Network FC switch-8 and switch-16. |
|
switch2test(1M) |
Out-of-band diagnostic for testing ports on Sun StorEdge Network FC 2 Gigabit switch-8 and switch-16. |
|
t3test(1M) |
In-band diagnostic for Sun StorEdge T3 and T3+ LUNs attached via the host data-path. |
|
t3ofdg(1M) |
Out-of-band diagnostic for Sun StorEdge T3 and T3+ LUNs attached via the ethernet connection. t3ofdg will test all of the FRUs within the T3 enclosure |
|
t3volverify(1M) |
Out-of-band diagnostic for Sun StorEdge T3 and T3+ LUNs attached via the ethernet connection. t3volverify will execute the volume verify function on the selected T3. |
|
se_configcheck(1M) |
Verify the configuration of a Sun Solution System (3900/6900).
|
|
se2_configcheck(1M) |
Verify the configuration of a Sun Solution System (6320). |
|
vediag(1M) |
Out-of-band diagnostic for Virtualization Engine (VE) attached via the ethernet connection. Initiates and monitors diagnostics on the virtualization engine. |
|
veluntest(1M) |
In-band diagnostic for Virtualization Engine VE attached storage. Verifies the functionality of the in-band virtualization engine Sun StorEdge 3900/6900 Series LUN(s). |
Exercisors
|
stresstest(1M) |
In-band exercisor for all I/O devices attached via a host data-path. |
|
dex(1M) |
In-band exercisor for all disk and tape drives attached via the host data-path. |
|
lbf(1M) |
In-band exercisor for FC loops(media) utilized by the host Sun StorEdge HBAs soc+ and QLC 2200. |
|