# packages

pkgId: 9f2fb3b71f9d23c2358ae14d2edce9471bda11ec
name: tetex-dvips
arch: x86_64
version: 3.0
epoch: 0
release: 33.15.el5_8.1
summary: A DVI to PostScript converter for the TeX text formatting system.
url: http://www.tug.org/teTeX/
rpm_license: distributable
rpm_group: Applications/Publishing
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: tetex-3.0-33.15.el5_8.1.src.rpm
location_href: tetex-dvips-3.0-33.15.el5_8.1.x86_64.rpm
checksum_type: sha
description:
  Dvips converts .dvi files produced by the TeX text formatting system
  (or by another processor like GFtoDVI) to PostScript(TM) format.
  Normally the PostScript file is sent directly to your printer.

  If you are installing tetex, so that you can use the TeX text
  formatting system without direct PDF compilation, consider to install
  tetex-dvips. In addition, you will need to install tetex-afm (for converting
  PostScript font description files), tetex-latex (a higher level formatting
  package which provides an easier-to-use interface for TeX), and tetex-xdvi
  (for previewing .dvi files in X). If you are installing TeX and you are
  not an expert at it, you should also install the tetex-doc package, which
  contains documentation for the TeX system.


pkgId: 05d6a000e1be169e5a4f87ecdb615cc750b00c3d
name: tetex-fonts
arch: x86_64
version: 3.0
epoch: 0
release: 33.15.el5_8.1
summary: The font files for the TeX text formatting system.
url: http://www.tug.org/teTeX/
rpm_license: distributable
rpm_group: Applications/Publishing
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: tetex-3.0-33.15.el5_8.1.src.rpm
location_href: tetex-fonts-3.0-33.15.el5_8.1.x86_64.rpm
checksum_type: sha
description:
  The tetex-fonts package contains fonts used by both the Xdvi previewer and
  the TeX text formatting system.

  You will need to install tetex-fonts if you wish to use either tetex-xdvi
  (for previewing .dvi files in X) or the tetex package (the core of the TeX
  text formatting system).


pkgId: 3ff02e8c3e49b3c45b91ea7d7590dfa2c2696847
name: tetex-latex
arch: x86_64
version: 3.0
epoch: 0
release: 33.15.el5_8.1
summary: The LaTeX front end for the TeX text formatting system.
url: http://www.tug.org/teTeX/
rpm_license: distributable
rpm_group: Applications/Publishing
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: tetex-3.0-33.15.el5_8.1.src.rpm
location_href: tetex-latex-3.0-33.15.el5_8.1.x86_64.rpm
checksum_type: sha
description:
  LaTeX is a front end for the TeX text formatting system. Easier to
  use than TeX. LaTeX is essentially a set of TeX macros which provide
  convenient, predefined document formats for users. It also allows to
  compile LaTeX files directly to PDF format.

  If you are installing tetex, so that you can use the TeX text
  formatting system, consider to install tetex-latex.
  If you are not an expert at TeX, you should also install
  the tetex-doc package, which contains documentation for TeX.


pkgId: 0dc14a7cf3e20d8e06b0b59e308875adc5d68f04
name: tetex-xdvi
arch: x86_64
version: 3.0
epoch: 0
release: 33.15.el5_8.1
summary: An X viewer for DVI files.
url: http://www.tug.org/teTeX/
rpm_license: distributable
rpm_group: Applications/Publishing
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: tetex-3.0-33.15.el5_8.1.src.rpm
location_href: tetex-xdvi-3.0-33.15.el5_8.1.x86_64.rpm
checksum_type: sha
description:
  Xdvi allows you to preview the TeX text formatting system's output
  .dvi files on an X Window System.

  If you are installing tetex and you use PlainTeX or you are using DVI files,
  you will also need to install tetex-xdvi which allows you to view DVI files.
  Consider installing tetex-dvips (for converting .dvi files to PostScript format
  for printing on PostScript printers), and tetex-latex (a higher level formatting
  package which provides an easier-to-use interface for TeX). If you are
  not a TeX expert, you will probably also want to install the tetex-doc
  package, which contains documentation for the TeX text formatting
  system.


pkgId: eae25e04e452032d45ec511605560635d7a483c8
name: texi2html
arch: noarch
version: 1.76
epoch: 0
release: 4.fc6
summary: A highly customizable texinfo to HTML and other formats translator
url: http://www.nongnu.org/texi2html/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Text
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: texi2html-1.76-4.fc6.src.rpm
location_href: texi2html-1.76-4.fc6.noarch.rpm
checksum_type: sha
description:
  The basic purpose of texi2html is to convert Texinfo documents into HTML,
  and other formats.  Configuration files written in perl provide fine degree
  of control over the final output, allowing most every aspect of the final
  output not specified in the Texinfo input file to be specified.


pkgId: 93a583ed801a5d04146d120020ee139b5d1c4657
name: texinfo
arch: x86_64
version: 4.8
epoch: 0
release: 14.el5
summary: Tools needed to create Texinfo format documentation files.
url: http://www.gnu.org/software/texinfo/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Publishing
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: texinfo-4.8-14.el5.src.rpm
location_href: texinfo-4.8-14.el5.x86_64.rpm
checksum_type: sha
description:
  Texinfo is a documentation system that can produce both online
  information and printed output from a single source file. The GNU
  Project uses the Texinfo file format for most of its documentation.

  Install texinfo if you want a documentation system for producing both
  online and print documentation from the same source file and/or if you
  are going to write documentation for the GNU Project.


pkgId: 0b3f22229d6ae1a79eec36b542a716836279ebe5
name: texinfo-tex
arch: x86_64
version: 4.8
epoch: 0
release: 14.el5
summary: Tools for fromating Texinfo documentation files using TeX
url: http://www.gnu.org/software/texinfo/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Publishing
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: texinfo-4.8-14.el5.src.rpm
location_href: texinfo-tex-4.8-14.el5.x86_64.rpm
checksum_type: sha
description:
  Texinfo is a documentation system that can produce both online
  information and printed output from a single source file. The GNU
  Project uses the Texinfo file format for most of its documentation.

  The texinfo-tex package provides tools to format Texinfo documents
  for printing using TeX.


pkgId: 4258ee95aa98f4d34fb8b8f261c3be04093566e0
name: tftp
arch: x86_64
version: 0.49
epoch: 0
release: 2
summary: The client for the Trivial File Transfer Protocol (TFTP).
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: tftp-0.49-2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tftp-0.49-2.x86_64.rpm
checksum_type: sha
description:
  The Trivial File Transfer Protocol (TFTP) is normally used only for
  booting diskless workstations.  The tftp package provides the user
  interface for TFTP, which allows users to transfer files to and from a
  remote machine.  This program and TFTP provide very little security,
  and should not be enabled unless it is expressly needed.


pkgId: 9c9a0be2a4d3d3c3b6c42a219cc4c313afbcefe7
name: tftp-server
arch: x86_64
version: 0.49
epoch: 0
release: 2
summary: The server for the Trivial File Transfer Protocol (TFTP).
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Daemons
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: tftp-0.49-2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tftp-server-0.49-2.x86_64.rpm
checksum_type: sha
description:
  The Trivial File Transfer Protocol (TFTP) is normally used only for
  booting diskless workstations.  The tftp-server package provides the
  server for TFTP, which allows users to transfer files to and from a
  remote machine. TFTP provides very little security, and should not be
  enabled unless it is expressly needed.  The TFTP server is run from
  /etc/xinetd.d/tftp, and is disabled by default on Red Hat Linux systems.


pkgId: 8386647a7139aff652a68df7d74bec548818f5d9
name: thunderbird-calendar-tweaks
arch: x86_64
version: 3.1
epoch: 0
release: 2.slc5
summary: Lightning Calendar Extension for Thunderbird
url: https://addons.mozilla.org/en-US/thunderbird/addon/14384/
rpm_license: MPL
rpm_vendor: CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: thunderbird-calendar-tweaks-3.1-2.slc5.src.rpm
rpm_packager: Jaroslaw Polok <jaroslaw.polok@cern.ch>
location_href: thunderbird-calendar-tweaks-3.1-2.slc5.x86_64.rpm
checksum_type: sha
description:
  Allows several tweaks to the Thunderbird/Lightning calendar user interface including new selection styles and repeating event icons. Mimics the colors and styles found in MS Outlook.


pkgId: 1e2473f4774c4b1da22c7fb34757004c77f25271
name: tidy
arch: x86_64
version: 0.99.0
epoch: 0
release: 12.20070228.sl5
summary: Utility to clean up and pretty print HTML/XHTML/XML
url: http://tidy.sourceforge.net/
rpm_license: W3C Software License
rpm_vendor: Scientific Linux
rpm_group: Applications/Text
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tidy-0.99.0-12.20070228.sl5.src.rpm
location_href: tidy-0.99.0-12.20070228.sl5.x86_64.rpm
checksum_type: sha
description:
  When editing HTML it's easy to make mistakes. Wouldn't it be nice if
  there was a simple way to fix these mistakes automatically and tidy up
  sloppy editing into nicely layed out markup? Well now there is! Dave
  Raggett's HTML TIDY is a free utility for doing just that. It also
  works great on the atrociously hard to read markup generated by
  specialized HTML editors and conversion tools, and can help you
  identify where you need to pay further attention on making your pages
  more accessible to people with disabilities.


pkgId: 4058e6704173fa60ccf1dc7143f1e08d524c481c
name: time
arch: x86_64
version: 1.7
epoch: 0
release: 27.2.2
summary: A GNU utility for monitoring a program's use of system resources.
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: time-1.7-27.2.2.src.rpm
location_href: time-1.7-27.2.2.x86_64.rpm
checksum_type: sha
description:
  The GNU time utility runs another program, collects information about
  the resources used by that program while it is running, and displays
  the results.


pkgId: 393d24740559948d889de460d07e2ddb7a886ac8
name: tix
arch: i386
version: 8.4.0
epoch: 1
release: 11.fc6
summary: A set of extension widgets for Tk
url: http://tix.sourceforge.net/
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: Development/Languages
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tix-8.4.0-11.fc6.src.rpm
location_href: tix-8.4.0-11.fc6.i386.rpm
checksum_type: sha
description:
  Tix, the Tk Interface eXtension, is a powerful set of user interface
  components that expands the capabilities of your Tcl/Tk and Python
  applications. Using Tix together with Tk will greatly enhance the
  appearance and functionality of your application.


pkgId: 7ca07e7183142de7edabe0e51a41eae2238de51d
name: tix-devel
arch: i386
version: 8.4.0
epoch: 1
release: 11.fc6
summary: Tk Interface eXtension development files
url: http://tix.sourceforge.net/
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: Development/Languages
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tix-8.4.0-11.fc6.src.rpm
location_href: tix-devel-8.4.0-11.fc6.i386.rpm
checksum_type: sha
description:
  Tix, the Tk Interface eXtension, is a powerful set of user interface
  components that expands the capabilities of your Tcl/Tk and Python
  applications. Using Tix together with Tk will greatly enhance the
  appearance and functionality of your application.

  This package contains the tix development files needed for building
  tix applications.


pkgId: 8db5a6eef9bf170fd66e4a42da57d9fe91ad6a2d
name: tix-doc
arch: x86_64
version: 8.4.0
epoch: 1
release: 11.fc6
summary: Tk Interface eXtension documentation
url: http://tix.sourceforge.net/
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: Development/Languages
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tix-8.4.0-11.fc6.src.rpm
location_href: tix-doc-8.4.0-11.fc6.x86_64.rpm
checksum_type: sha
description:
  Tix, the Tk Interface eXtension, is a powerful set of user interface
  components that expands the capabilities of your Tcl/Tk and Python
  applications. Using Tix together with Tk will greatly enhance the
  appearance and functionality of your application.

  This package contains the tix documentation


pkgId: 5a3b1d6dfd6db8115bc1f40bdac346ee634c0f1f
name: tk
arch: i386
version: 8.4.13
epoch: 0
release: 5.el5_1.1
summary: Tk graphical toolkit for the Tcl scripting language
url: http://tcl.sourceforge.net/
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: Development/Languages
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tk-8.4.13-5.el5_1.1.src.rpm
location_href: tk-8.4.13-5.el5_1.1.i386.rpm
checksum_type: sha
description:
  When paired with the Tcl scripting language, Tk provides a fast and powerful
  way to create cross-platform GUI applications.


pkgId: c524773d9ccaf82956831bcd1e95307eea0f515f
name: tk-devel
arch: i386
version: 8.4.13
epoch: 0
release: 5.el5_1.1
summary: Tk graphical toolkit development files
url: http://tcl.sourceforge.net/
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: Development/Languages
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tk-8.4.13-5.el5_1.1.src.rpm
location_href: tk-devel-8.4.13-5.el5_1.1.i386.rpm
checksum_type: sha
description:
  When paired with the Tcl scripting language, Tk provides a fast and powerful
  way to create cross-platform GUI applications.

  The package contains the development files and man pages for tk.


pkgId: 7b2c58a55403ab6c91b47a0fe302c67b9d3cd0b1
name: tkdiff
arch: noarch
version: 4.1.4
epoch: 0
release: 1.cern
summary: tkdiff is a graphical front end to the diff program.
url: http://sourceforge.net/projects/tkdiff/
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Version Control
rpm_buildhost: lxslc5-i386.cern.ch
rpm_sourcerpm: tkdiff-4.1.4-1.cern.src.rpm
rpm_packager: Matthias Schroder <Matthias.Schroder@cern.ch>
location_href: tkdiff-4.1.4-1.cern.noarch.rpm
checksum_type: sha
description:
  tkdiff is a graphical front end to the diff program. It provides a side-by-side
  view of the differences between two files, along with several innovative
  features such as diff bookmarks and a graphical map of differences for quick
  navigation.


pkgId: cea6815a19ff614b41c4e3efac2b7a9b041b8a80
name: tkinter
arch: x86_64
version: 2.4.3
epoch: 0
release: 56.el5
summary: A graphical user interface for the Python scripting language.
url: http://www.python.org/
rpm_license: PSF - see LICENSE
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Languages
rpm_buildhost: lxdist01
rpm_sourcerpm: python-2.4.3-56.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tkinter-2.4.3-56.el5.x86_64.rpm
checksum_type: sha
description:
  The Tkinter (Tk interface) program is an graphical user interface for
  the Python scripting language.

  You should install the tkinter package if you'd like to use a graphical
  user interface for Python programming.


pkgId: 23d73ea8886bd0a3b705b2596dfcc3d3794ab657
name: tmpwatch
arch: x86_64
version: 2.9.7
epoch: 0
release: 1.1.el5.5
summary: A utility for removing files based on when they were last accessed.
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: tmpwatch-2.9.7-1.1.el5.5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tmpwatch-2.9.7-1.1.el5.5.x86_64.rpm
checksum_type: sha
description:
  The tmpwatch utility recursively searches through specified
  directories and removes files which have not been accessed in a
  specified period of time.  Tmpwatch is normally used to clean up
  directories which are used for temporarily holding files (for example,
  /tmp).  Tmpwatch ignores symlinks, won't switch filesystems and only
  removes empty directories and regular files.


pkgId: d0d460cbe3b22b25a434dab0f4ec39b8a6684a42
name: tn5250
arch: x86_64
version: 0.17.3
epoch: 0
release: 6
summary: 5250 Telnet protocol and Terminal
url: http://tn5250.sourceforge.net/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Internet
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tn5250-0.17.3-6.src.rpm
location_href: tn5250-0.17.3-6.x86_64.rpm
checksum_type: sha
description:
  tn5250 is an implementation of the 5250 Telnet protocol.
  It provides the 5250 library and a 5250 terminal emulation.


pkgId: 466ef90588677d7ac48da45d6b48aa992d9e8e17
name: tog-pegasus
arch: i386
version: 2.11.0
epoch: 2
release: 3.el5
summary: OpenPegasus WBEM Services for Linux
url: http://www.openpegasus.org
rpm_license: Open Group Pegasus Open Source
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Systems Management/Base
rpm_buildhost: lxbslc6-i386
rpm_sourcerpm: tog-pegasus-2.11.0-3.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tog-pegasus-2.11.0-3.el5.i386.rpm
checksum_type: sha
description:
  OpenPegasus WBEM Services for Linux enables management solutions that deliver
  increased control of enterprise resources. WBEM is a platform and resource
  independent DMTF standard that defines a common information model and
  communication protocol for monitoring and controlling resources from diverse
  sources.


pkgId: 26c19de0d4973b0239cda52439250eef2b2e10e8
name: tog-pegasus-devel
arch: i386
version: 2.11.0
epoch: 2
release: 3.el5
summary: The OpenPegasus Software Development Kit
url: http://www.openpegasus.org
rpm_license: Open Group Pegasus Open Source
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Systems Management/Base
rpm_buildhost: lxbslc6-i386
rpm_sourcerpm: tog-pegasus-2.11.0-3.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tog-pegasus-devel-2.11.0-3.el5.i386.rpm
checksum_type: sha
description:
  The OpenPegasus WBEM Services for Linux SDK is the developer's kit for the
  OpenPegasus WBEM Services for Linux release. It provides Linux C++ developers
  with the WBEM files required to build WBEM Clients and Providers. It also
  supports C provider developers via the CMPI interface.


pkgId: adcdd84b33e36d1ada63d020f148b2b3637ab804
name: tomcat5
arch: x86_64
version: 5.5.23
epoch: 0
release: 0jpp.40.el5_9
summary: Apache Servlet/JSP Engine, RI for Servlet 2.4/JSP 2.0 API
url: http://tomcat.apache.org/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Networking/Daemons
rpm_buildhost: lxdist04
rpm_sourcerpm: tomcat5-5.5.23-0jpp.40.el5_9.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tomcat5-5.5.23-0jpp.40.el5_9.x86_64.rpm
checksum_type: sha
description:
  Tomcat is the servlet container that is used in the official Reference
  Implementation for the Java Servlet and JavaServer Pages technologies.
  The Java Servlet and JavaServer Pages specifications are developed by
  Sun under the Java Community Process.

  Tomcat is developed in an open and participatory environment and
  released under the Apache Software License. Tomcat is intended to be
  a collaboration of the best-of-breed developers from around the world.
  We invite you to participate in this open development project. To
  learn more about getting involved, click here.


pkgId: dd041c0662b47719d353edc359a1249101d8d837
name: tomcat5-jsp-2.0-api-javadoc
arch: x86_64
version: 5.5.23
epoch: 0
release: 0jpp.40.el5_9
summary: Javadoc generated documentation for tomcat5-jsp-2.0-api
url: http://tomcat.apache.org/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Documentation
rpm_buildhost: lxdist04
rpm_sourcerpm: tomcat5-5.5.23-0jpp.40.el5_9.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tomcat5-jsp-2.0-api-javadoc-5.5.23-0jpp.40.el5_9.x86_64.rpm
checksum_type: sha
description:
  Contains the javadoc generated documentation for the implementation classes
  of the Jakarta Tomcat JSP API (packages javax.servlet.jsp).


pkgId: 11cdc99e20e925248c19e4780718af67173238ef
name: tomcat5-servlet-2.4-api-javadoc
arch: x86_64
version: 5.5.23
epoch: 0
release: 0jpp.40.el5_9
summary: Javadoc generated documentation for tomcat5-servlet-2.4-api
url: http://tomcat.apache.org/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Documentation
rpm_buildhost: lxdist04
rpm_sourcerpm: tomcat5-5.5.23-0jpp.40.el5_9.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tomcat5-servlet-2.4-api-javadoc-5.5.23-0jpp.40.el5_9.x86_64.rpm
checksum_type: sha
description:
  Contains the javadoc generated documentation for the implementation classes
  of the Jakarta Tomcat Servlet and JSP APIs (packages javax.servlet).


pkgId: 28be25aa389b99d8b8d4b497f27fce5400ce89a6
name: totem
arch: i386
version: 2.16.7
epoch: 0
release: 7.el5_6.1
summary: Movie player for GNOME 2
url: http://www.hadess.net/totem.php3
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Multimedia
rpm_buildhost: lxvmslc5-i386.cern.ch
rpm_sourcerpm: totem-2.16.7-7.el5_6.1.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: totem-2.16.7-7.el5_6.1.i386.rpm
checksum_type: sha
description:
  Totem is simple movie player for the Gnome desktop. It features a
  simple playlist, a full-screen mode, seek and volume controls, as well as
  a pretty complete keyboard navigation.


pkgId: c5e5967ee74eac5506fb5bd203acf4d350861b89
name: totem-devel
arch: i386
version: 2.16.7
epoch: 0
release: 7.el5_6.1
summary: Libraries/include files for Totem
url: http://www.hadess.net/totem.php3
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxvmslc5-i386.cern.ch
rpm_sourcerpm: totem-2.16.7-7.el5_6.1.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: totem-devel-2.16.7-7.el5_6.1.i386.rpm
checksum_type: sha
description:
  Totem is simple movie player for the Gnome desktop. It features a
  simple playlist, a full-screen mode, seek and volume controls, as well as
  a pretty complete keyboard navigation.

  This package contains the libraries and includes files necessary to develop
  applications with Totem's plparser library.


pkgId: 151cc211ae148255fc18d13f478fb242f3f16b62
name: totem-mozplugin
arch: x86_64
version: 2.16.7
epoch: 0
release: 7.el5_6.1
summary: Mozilla plugin for Totem
url: http://www.hadess.net/totem.php3
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: totem-2.16.7-7.el5_6.1.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: totem-mozplugin-2.16.7-7.el5_6.1.x86_64.rpm
checksum_type: sha
description:
  Totem is simple movie player for the Gnome desktop. The mozilla plugin
  for totem allows totem to be embeded into a web browser.


pkgId: 7ce317c30dc3d2ff87d0f9882c22e63b13cc518c
name: tpm-tools
arch: i386
version: 1.3.1
epoch: 0
release: 1.el5
summary: Management tools for the TPM hardware
url: http://trousers.sourceforge.net
rpm_license: CPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tpm-tools-1.3.1-1.el5.src.rpm
location_href: tpm-tools-1.3.1-1.el5.i386.rpm
checksum_type: sha
description:
  tpm-tools is a group of tools to manage and utilize the Trusted Computing
  Group's TPM hardware. TPM hardware can create, store and use RSA keys
  securely (without ever being exposed in memory), verify a platform's
  software state using cryptographic hashes and more.


pkgId: 4152a22ea6332dad05d4f2d50d399d4fae6aba2d
name: tpm-tools-devel
arch: i386
version: 1.3.1
epoch: 0
release: 1.el5
summary: Files to use the library routines supplied with tpm-tools
url: http://trousers.sourceforge.net
rpm_license: CPL
rpm_vendor: Scientific Linux
rpm_group: Development/Libraries
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tpm-tools-1.3.1-1.el5.src.rpm
location_href: tpm-tools-devel-1.3.1-1.el5.i386.rpm
checksum_type: sha
description:
  tpm-tools-devel is a package that contains the libraries and headers
  necessary for developing tpm-tools applications.


pkgId: 8b8ce2a59f20ab074d0d188b28b9655a959686c8
name: tree
arch: x86_64
version: 1.5.0
epoch: 0
release: 4
summary: A utility which displays a tree view of the contents of directories.
url: http://mama.indstate.edu/users/ice/tree/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/File
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tree-1.5.0-4.src.rpm
location_href: tree-1.5.0-4.x86_64.rpm
checksum_type: sha
description:
  The tree utility recursively displays the contents of directories in a
  tree-like format.  Tree is basically a UNIX port of the DOS tree
  utility.


pkgId: 17faa0cedbdc04efd2e251d2dfe1c23af5521ca5
name: traceroute
arch: x86_64
version: 2.0.1
epoch: 3
release: 6.el5
summary: Traces the route taken by packets over an IPv4/IPv6 network
url: http://dmitry.butskoy.name/traceroute
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: traceroute-2.0.1-6.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: traceroute-2.0.1-6.el5.x86_64.rpm
checksum_type: sha
description:
  The traceroute utility displays the route used by IP packets on their
  way to a specified network (or Internet) host.  Traceroute displays
  the IP number and host name (if possible) of the machines along the
  route taken by the packets.  Traceroute is used as a network debugging
  tool.  If you're having network connectivity problems, traceroute will
  show you where the trouble is coming from along the route.

  Install traceroute if you need a tool for diagnosing network connectivity
  problems.


pkgId: 899adfddf32c1734508140bbc9c62d2d0b577b96
name: transfig
arch: x86_64
version: 3.2.4
epoch: 1
release: 16.slc5.2
summary: A utility for converting FIG files (made by xfig) to other formats.
rpm_license: distributable
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Multimedia
rpm_buildhost: lxdist04
rpm_sourcerpm: transfig-3.2.4-16.slc5.2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: transfig-3.2.4-16.slc5.2.x86_64.rpm
checksum_type: sha
description:
  The transfig utility creates a makefile which translates FIG (created
  by xfig) or PIC figures into a specified LaTeX graphics language (for
     example, PostScript(TM)).  Transfig is used to create TeX documents
  which are portable (i.e., they can be printed in a wide variety of
  environments).

  Install transfig if you need a utility for translating FIG or PIC
  figures into certain graphics languages.


pkgId: 4fdd1dcdb3a4a6798f3fda2c8971e8fde0082201
name: trousers
arch: i386
version: 0.3.1
epoch: 0
release: 4.el5
summary: TCG's Software Stack v1.2
url: http://trousers.sourceforge.net
rpm_license: CPL
rpm_vendor: Scientific Linux
rpm_group: System Environment/Libraries
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: trousers-0.3.1-4.el5.src.rpm
location_href: trousers-0.3.1-4.el5.i386.rpm
checksum_type: sha
description:
  TrouSerS is an implementation of the Trusted Computing Group's Software Stack
  (TSS) specification. You can use TrouSerS to write applications that make use
  of your TPM hardware. TPM hardware can create, store and use RSA keys
  securely (without ever being exposed in memory), verify a platform's software
  state using cryptographic hashes and more.


pkgId: 4318ee7944d3d38374ef34f6b8b261949c691c9d
name: trousers-static
arch: x86_64
version: 0.3.1
epoch: 0
release: 4.el5
summary: TrouSerS TCG Device Driver Library
url: http://trousers.sourceforge.net
rpm_license: CPL
rpm_vendor: Scientific Linux
rpm_group: Development/Libraries
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: trousers-0.3.1-4.el5.src.rpm
location_href: trousers-static-0.3.1-4.el5.x86_64.rpm
checksum_type: sha
description:
  The TCG Device Driver Library (TDDL) used by the TrouSerS tcsd as the
  interface to the TPM's device driver. For more information about writing
  applications to the TDDL interface, see the latest TSS spec at
  https://www.trustedcomputinggroup.org/specs/TSS.


pkgId: 0d1ce1068688acc60725a46b3e2efcae30ca3eaa
name: tsclient
arch: x86_64
version: 0.148
epoch: 0
release: 6.el5
summary: Client for VNC and Windows Terminal Server
url: http://www.gnomepro.com/tsclient/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: User Interface/X
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tsclient-0.148-6.el5.src.rpm
location_href: tsclient-0.148-6.el5.x86_64.rpm
checksum_type: sha
description:
  tsclient is a frontend that makes it easy to use rdesktop and vncviewer.
  You will need to install rdesktop or vnc in addition to tsclient.


pkgId: 3850af02bf380864ad44f84edc77ecf23456e8e4
name: ttmkfdir
arch: x86_64
version: 3.0.9
epoch: 0
release: 23.el5
summary: Utility to create fonts.scale files for truetype fonts
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: ttmkfdir-3.0.9-23.el5.src.rpm
location_href: ttmkfdir-3.0.9-23.el5.x86_64.rpm
checksum_type: sha
description:
  ttmkfdir is a utility used to create fonts.scale files in
  TrueType font directories in order to prepare them for use
  by the font server.


pkgId: c9731a5d3051088661f8ced6328357ba9c279c30
name: tunctl
arch: x86_64
version: 1.5
epoch: 0
release: 3.el5
summary: Create and remove virtual network interfaces
url: http://tunctl.sourceforge.net/
rpm_license: GPL+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/System
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: tunctl-1.5-3.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: tunctl-1.5-3.el5.x86_64.rpm
checksum_type: sha
description:
  tunctl is a tool to set up and maintain persistent TUN/TAP network
  interfaces, enabling user applications access to the wire side of a
  virtual nework interface. Such interfaces is useful for connecting VPN
  software, virtualization, emulation and a number of other similar
  applications to the network stack.

  tunctl originates from the User Mode Linux project.


pkgId: 46b25afe330f0d36dcf29df4680f78583500c25f
name: tux
arch: x86_64
version: 3.2.18
epoch: 0
release: 9.fc6
summary: User-space component of TUX kernel-based threaded HTTP server
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: System Environment/Daemons
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: tux-3.2.18-9.fc6.src.rpm
location_href: tux-3.2.18-9.fc6.x86_64.rpm
checksum_type: sha
description:
  TUX is a kernel-based, threaded, extremely high performance HTTP server.
  It is able to efficiently and safely serve both static and dynamic data.
  TUX moves the HTTP protocol stack to the kernel, and can handle requests
  for data with both kernel-space and user-space modules.

  See http://www.redhat.com/mailing-lists/ for instructions on subscribing
  to tux-list@redhat.com; users of TUX have the opportunity to share their
  experiences and receive notices of new versions on that list.


pkgId: cb3ce51f0d8370d9c6a1d17d89050b07a1482e50
name: unifdef
arch: x86_64
version: 1.171
epoch: 0
release: 5.fc6
summary: Unifdef tool for removing ifdef'd lines
url: http://www.freebsd.org/cgi/cvsweb.cgi/src/usr.bin/unifdef/
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: Development/Languages
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: unifdef-1.171-5.fc6.src.rpm
location_href: unifdef-1.171-5.fc6.x86_64.rpm
checksum_type: sha
description:
  Unifdef is useful for removing ifdefed lines from a file while otherwise
  leaving the file alone. Unifdef acts on #ifdef, #ifndef, #else, and #endif
  lines, and it knows only enough about C and C++ to know when one of these
  is inactive because it is inside a comment, or a single or double quote.


pkgId: dc2c3b93150f83b9644ab889cc3790904ac326b8
name: units
arch: x86_64
version: 1.85
epoch: 0
release: 1.2.2
summary: A utility for converting amounts from one unit to another.
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Engineering
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: units-1.85-1.2.2.src.rpm
location_href: units-1.85-1.2.2.x86_64.rpm
checksum_type: sha
description:
  Units converts an amount from one unit to another, or tells you what
  mathematical operation you need to perform to convert from one unit to
  another. The units program can handle multiplicative scale changes as
  well as conversions such as Fahrenheit to Celsius.


pkgId: b6900f1e144fec2fb2f2bad15a5728645f689645
name: unixODBC
arch: i386
version: 2.2.11
epoch: 0
release: 10.el5
summary: A complete ODBC driver manager for Linux
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-i386
rpm_sourcerpm: unixODBC-2.2.11-10.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: unixODBC-2.2.11-10.el5.i386.rpm
checksum_type: sha
description:
  Install unixODBC if you want to access databases through ODBC.  This
  package includes low-level drivers for MySQL, PostgreSQL, and local files.
  However, the included drivers are not as up-to-date as the ones distributed
  separately.  It is recommended that you install and use the MyODBC package
  if you need a driver for MySQL, and/or the postgresql-odbc package for
  PostgreSQL.


pkgId: ad04fbb3f3035762ac6622f053502396ed7530a3
name: unixODBC-devel
arch: i386
version: 2.2.11
epoch: 0
release: 10.el5
summary: Development files for programs which will use the unixODBC library
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxbslc6-i386
rpm_sourcerpm: unixODBC-2.2.11-10.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: unixODBC-devel-2.2.11-10.el5.i386.rpm
checksum_type: sha
description:
  The unixODBC package can be used to access databases through ODBC
  drivers. If you want to develop programs that will access data through
  ODBC, you need to install this package.


pkgId: 6dface4d58476b602cf1fc53b033b68f02a7e0e3
name: unixODBC-libs
arch: i386
version: 2.2.11
epoch: 0
release: 10.el5
summary: The shared libraries required by programs that use unixODBC
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-i386
rpm_sourcerpm: unixODBC-2.2.11-10.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: unixODBC-libs-2.2.11-10.el5.i386.rpm
checksum_type: sha
description:
  The unixODBC-libs package provides the essential shared libraries that
  make up the unixODBC driver manager.  This is the minimum package to
  install to use unixODBC.


pkgId: f7b20916512e75bc5848f200de35c3793dc435b4
name: unixODBC64
arch: x86_64
version: 2.2.14
epoch: 0
release: 3.el5
summary: A complete ODBC driver manager for Linux
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: unixODBC64-2.2.14-3.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: unixODBC64-2.2.14-3.el5.x86_64.rpm
checksum_type: sha
description:
  Install unixODBC64 if you want to access databases through ODBC, and you
  need to use the corrected 64-bit ABI used in unixODBC 2.2.12 and up.
  This base package provides documentation and command-line utility programs,
  but is not required for client applications to make use of unixODBC64.
  You will also need the mysql-connector-odbc64 package if you want to access
  a MySQL database, and/or the postgresql-odbc64 package for PostgreSQL.


pkgId: 3414205f93fd46fa36ec949d551da2afaca04fab
name: unixODBC64-devel
arch: x86_64
version: 2.2.14
epoch: 0
release: 3.el5
summary: Development files for programs which will use the unixODBC library
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: unixODBC64-2.2.14-3.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: unixODBC64-devel-2.2.14-3.el5.x86_64.rpm
checksum_type: sha
description:
  The unixODBC64 package can be used to access databases through ODBC
  drivers. If you want to develop programs that will access data through
  ODBC, you need to install this package.


pkgId: 77d5de0e70c40a5b83acd765ad51838995870afc
name: unixODBC64-libs
arch: x86_64
version: 2.2.14
epoch: 0
release: 3.el5
summary: The shared libraries required by programs that use unixODBC
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: unixODBC64-2.2.14-3.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: unixODBC64-libs-2.2.14-3.el5.x86_64.rpm
checksum_type: sha
description:
  The unixODBC64-libs package provides the essential shared libraries that
  make up the unixODBC64 driver manager.  This is the minimum package to
  install to use unixODBC64.


pkgId: 2d145faf5d8e5150ac37dbd20ded4de196831efa
name: unzip
arch: x86_64
version: 5.52
epoch: 0
release: 3.el5
summary: A utility for unpacking zip files.
url: http://www.info-zip.org/pub/infozip/UnZip.html
rpm_license: BSD
rpm_vendor: Scientific Linux
rpm_group: Applications/Archiving
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: unzip-5.52-3.el5.src.rpm
location_href: unzip-5.52-3.el5.x86_64.rpm
checksum_type: sha
description:
  The unzip utility is used to list, test, or extract files from a zip
  archive.  Zip archives are commonly found on MS-DOS systems.  The zip
  utility, included in the zip package, creates zip archives.  Zip and
  unzip are both compatible with archives created by PKWARE(R)'s PKZIP
  for MS-DOS, but the programs' options and default behaviors do differ
  in some respects.

  Install the unzip package if you need to list, test or extract files from
  a zip archive.


pkgId: 6a269bd5c86af77ff464274f5d3b49c06ef7fa92
name: urw-fonts
arch: noarch
version: 2.3
epoch: 0
release: 6.1.1
summary: Free versions of the 35 standard PostScript fonts.
url: ftp://ftp.gnome.ru/fonts/urw/release/
rpm_license: GPL, URW holds copyright
rpm_vendor: Scientific Linux
rpm_group: User Interface/X
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: urw-fonts-2.3-6.1.1.src.rpm
location_href: urw-fonts-2.3-6.1.1.noarch.rpm
checksum_type: sha
description:
  Free, good quality versions of the 35 standard PostScript(TM) fonts,
  donated under the GPL by URW++ Design and Development GmbH.  The
  fonts.dir file font names match the original Adobe names of the fonts
  (e.g., Times, Helvetica, etc.).

  Install the urw-fonts package if you need free versions of standard
  PostScript fonts.


pkgId: 050a06ff484b7002bdfb3b7749f570b783967780
name: useraddcern
arch: noarch
version: 0.3
epoch: 0
release: 1.slc5
summary: CERN LDAP user/group database client.
rpm_license: GPL
rpm_vendor: CERN
rpm_group: CERN/Utilities
rpm_buildhost: lxbslc5-amd64.cern.ch
rpm_sourcerpm: useraddcern-0.3-1.slc5.src.rpm
rpm_packager: Linux.Support@cern.ch
location_href: useraddcern-0.3-1.slc5.noarch.rpm
checksum_type: sha
description:
  useraddcern is the CERN LDAP user/group database client.
  It acts as an frontend to system useradd / groupadd commands
  and allows easy configuration of CERN AFS accounts on the system.


pkgId: bcc3c0eb378a200877f4cf65b6d3b9f279d4980d
name: usermode
arch: x86_64
version: 1.88
epoch: 0
release: 3.el5.2
summary: Tools for certain user account management tasks.
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: usermode-1.88-3.el5.2.src.rpm
location_href: usermode-1.88-3.el5.2.x86_64.rpm
checksum_type: sha
description:
  The usermode package contains the userhelper program, which can be
  used to allow configured programs to be run with superuser privileges
  by ordinary users.


pkgId: 2043eccff1c0d36107fc0c57f4669596bf081e39
name: usermode-gtk
arch: x86_64
version: 1.88
epoch: 0
release: 3.el5.2
summary: Graphical tools for certain user account management tasks.
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: usermode-1.88-3.el5.2.src.rpm
location_href: usermode-gtk-1.88-3.el5.2.x86_64.rpm
checksum_type: sha
description:
  The usermode-gtk package contains several graphical tools for users:
  userinfo, usermount and userpasswd.  Userinfo allows users to change
  their finger information.  Usermount lets users mount, unmount, and
  format filesystems.  Userpasswd allows users to change their
  passwords.

  Install the usermode-gtk package if you would like to provide users with
  graphical tools for certain account management tasks.


pkgId: b34a37c8eb9dc9abeb4d8175dbae092bd2b9ee08
name: util-linux
arch: x86_64
version: 2.13
epoch: 0
release: 0.59.el5_8
summary: A collection of basic system utilities.
rpm_license: distributable
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxdist03
rpm_sourcerpm: util-linux-2.13-0.59.el5_8.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: util-linux-2.13-0.59.el5_8.x86_64.rpm
checksum_type: sha
description:
  The util-linux package contains a large variety of low-level system
  utilities that are necessary for a Linux system to function. Among
  others, Util-linux contains the fdisk configuration tool and the login
  program.


pkgId: 456e2e8bf9813a37bf9ddcf1cec45d9d247e552e
name: uucp
arch: x86_64
version: 1.07
epoch: 0
release: 12
summary: The uucp utility for copying files between systems.
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Communications
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: uucp-1.07-12.src.rpm
location_href: uucp-1.07-12.x86_64.rpm
checksum_type: sha
description:
  The uucp command copies files between systems. Uucp is primarily used
  by remote machines downloading and uploading email and news files to
  local machines.


pkgId: 800113b9d98e5f797e5b349e3d93e5679e54171f
name: uuid
arch: x86_64
version: 1.5.1
epoch: 0
release: 3.el5
summary: Universally Unique Identifier library
url: http://www.ossp.org/pkg/lib/uuid/
rpm_license: MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: uuid-1.5.1-3.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: uuid-1.5.1-3.el5.x86_64.rpm
checksum_type: sha
description:
  OSSP uuid is a ISO-C:1999 application programming interface (API)
  and corresponding command line interface (CLI) for the generation
  of DCE 1.1, ISO/IEC 11578:1996 and RFC 4122 compliant Universally
  Unique Identifier (UUID). It supports DCE 1.1 variant UUIDs of version
  1 (time and node based), version 3 (name based, MD5), version 4
  (random number based) and version 5 (name based, SHA-1). Additional
  API bindings are provided for the languages ISO-C++:1998, Perl:5 and
  PHP:4/5. Optional backward compatibility exists for the ISO-C DCE-1.1
  and Perl Data::UUID APIs.


pkgId: 0e48522b3433c882a326b1212defae12ad59a1ca
name: uuidd
arch: x86_64
version: 1.39
epoch: 0
release: 37.el5
summary: helper daemon to guarantee uniqueness of time-based UUIDs
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPLv2
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Daemons
rpm_buildhost: lxdist01
rpm_sourcerpm: e2fsprogs-1.39-37.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: uuidd-1.39-37.el5.x86_64.rpm
checksum_type: sha
description:
  The uuidd package contains a userspace daemon (uuidd) which guarantees
  uniqueness of time-based UUID generation even at very high rates on
  SMP systems.


pkgId: fd8bd786fbe82788e7d12544f5a0283442b145d5
name: valgrind
arch: i386
version: 3.5.0
epoch: 1
release: 5.el5
summary: Tool for finding memory management bugs in programs
url: http://www.valgrind.org/
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Debuggers
rpm_buildhost: lxvmslc5-i386.cern.ch
rpm_sourcerpm: valgrind-3.5.0-5.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: valgrind-3.5.0-5.el5.i386.rpm
checksum_type: sha
description:
  Valgrind is a tool to help you find memory-management problems in your
  programs. When a program is run under Valgrind's supervision, all
  reads and writes of memory are checked, and calls to
  malloc/new/free/delete are intercepted. As a result, Valgrind can
  detect a lot of problems that are otherwise very hard to
  find/diagnose.


pkgId: 6569cab51b41a643d4d90e7413e5b0c954fe6a17
name: velocity
arch: x86_64
version: 1.4
epoch: 0
release: 6jpp.1
summary: Java-based template engine
url: http://jakarta.apache.org/velocity/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux
rpm_group: Development/Libraries/Java
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: velocity-1.4-6jpp.1.src.rpm
location_href: velocity-1.4-6jpp.1.x86_64.rpm
checksum_type: sha
description:
  Velocity is a Java-based template engine. It permits anyone to use the
  simple yet powerful template language to reference objects defined in
  Java code.
  When Velocity is used for web development, Web designers can work in
  parallel with Java programmers to develop web sites according to the
  Model-View-Controller (MVC) model, meaning that web page designers can
  focus solely on creating a site that looks good, and programmers can
  focus solely on writing top-notch code. Velocity separates Java code
  from the web pages, making the web site more maintainable over the long
  run and providing a viable alternative to Java Server Pages (JSPs) or
  PHP.
  Velocity's capabilities reach well beyond the realm of web sites; for
  example, it can generate SQL and PostScript and XML (see Anakia for more
  information on XML transformations) from templates. It can be used
  either as a standalone utility for generating source code and reports,
  or as an integrated component of other systems. Velocity also provides
  template services for the Turbine web application framework.
  Velocity+Turbine provides a template service that will allow web
  applications to be developed according to a true MVC model.


pkgId: 332e74d768181fd96ba943dc673ad9eab3eff4f8
name: vim-X11
arch: x86_64
version: 7.0.109
epoch: 2
release: 7.2.el5
summary: The VIM version of the vi editor for the X Window System.
rpm_license: freeware
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Editors
rpm_buildhost: lxdist02
rpm_sourcerpm: vim-7.0.109-7.2.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: vim-X11-7.0.109-7.2.el5.x86_64.rpm
checksum_type: sha
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and
  more. VIM-X11 is a version of the VIM editor which will run within the
  X Window System.  If you install this package, you can run VIM as an X
  application with a full GUI interface and mouse support.

  Install the vim-X11 package if you'd like to try out a version of vi
  with graphics and mouse capabilities.  You'll also need to install the
  vim-common package.


pkgId: 1db532e3946110b4ccbefec64dae0a3dba723845
name: vim-common
arch: x86_64
version: 7.0.109
epoch: 2
release: 7.2.el5
summary: The common files needed by any version of the VIM editor.
rpm_license: freeware
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Editors
rpm_buildhost: lxdist02
rpm_sourcerpm: vim-7.0.109-7.2.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: vim-common-7.0.109-7.2.el5.x86_64.rpm
checksum_type: sha
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more.  The
  vim-common package contains files which every VIM binary will need in
  order to run.

  If you are installing vim-enhanced or vim-X11, you'll also need
  to install the vim-common package.


pkgId: 49f440face9f4243e2a1fed580a2c303c28bd2b7
name: vim-enhanced
arch: x86_64
version: 7.0.109
epoch: 2
release: 7.2.el5
summary: A version of the VIM editor which includes recent enhancements.
rpm_license: freeware
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Editors
rpm_buildhost: lxdist02
rpm_sourcerpm: vim-7.0.109-7.2.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: vim-enhanced-7.0.109-7.2.el5.x86_64.rpm
checksum_type: sha
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more.  The
  vim-enhanced package contains a version of VIM with extra, recently
  introduced features like Python and Perl interpreters.

  Install the vim-enhanced package if you'd like to use a version of the
  VIM editor which includes recently added enhancements like
  interpreters for the Python and Perl scripting languages.  You'll also
  need to install the vim-common package.


pkgId: b2f8b1d6f0202eedb96b9d56c062ec2a728e4a68
name: vim-minimal
arch: x86_64
version: 7.0.109
epoch: 2
release: 7.2.el5
summary: A minimal version of the VIM editor.
rpm_license: freeware
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Editors
rpm_buildhost: lxdist02
rpm_sourcerpm: vim-7.0.109-7.2.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: vim-minimal-7.0.109-7.2.el5.x86_64.rpm
checksum_type: sha
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more. The
  vim-minimal package includes a minimal version of VIM, which is
  installed into /bin/vi for use when only the root partition is
  present. NOTE: The online help is only available when the vim-common
  package is installed.


pkgId: f49a8f70f025210c891722e6bc0b45bd1d2837a1
name: vino
arch: x86_64
version: 2.13.5
epoch: 0
release: 10.el5_10
summary: A remote desktop system for GNOME
url: http://www.gnome.org
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/Desktops
rpm_buildhost: lxdist02
rpm_sourcerpm: vino-2.13.5-10.el5_10.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: vino-2.13.5-10.el5_10.x86_64.rpm
checksum_type: sha
description:
  Vino is a VNC server for GNOME. It allows remote users to
  connect to a running GNOME session using VNC.


pkgId: fcf9e191a91850992028155a87243f41b49e6de3
name: virt-manager
arch: x86_64
version: 0.6.1
epoch: 0
release: 16.el5
summary: Virtual Machine Manager
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Emulators
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: virt-manager-0.6.1-16.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: virt-manager-0.6.1-16.el5.x86_64.rpm
checksum_type: sha
description:
  Virtual Machine Manager provides a graphical tool for administering virtual
  machines for KVM, Xen, and QEmu. Start, stop, add or remove virtual devices,
  connect to a graphical or serial console, and see resource usage statistics
  for existing VMs on local or remote machines. Uses libvirt as the backend
  management API.


pkgId: 6b396a1021a9fdc64b52c8a6982287dd65afac5e
name: virt-viewer
arch: x86_64
version: 0.0.2
epoch: 0
release: 3.el5
summary: Virtual Machine Viewer
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/System
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: virt-viewer-0.0.2-3.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: virt-viewer-0.0.2-3.el5.x86_64.rpm
checksum_type: sha
description:
  Virtual Machine Viewer provides a graphical console client for connecting
  to virtual machines. It uses the GTK-VNC widget to provide the display,
  and libvirt for looking up VNC server details.


pkgId: 1739776db6e27d2f84a2af3c67a80e5474bc4dd6
name: virt-what
arch: x86_64
version: 1.11
epoch: 0
release: 2.el5
summary: Detect if we are running in a virtual machine
url: http://people.redhat.com/~rjones/virt-what/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Emulators
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: virt-what-1.11-2.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: virt-what-1.11-2.el5.x86_64.rpm
checksum_type: sha
description:
  virt-what is a shell script which can be used to detect if the program
  is running in a virtual machine.

  The program prints out a list of "facts" about the virtual machine,
  derived from heuristics.  One fact is printed per line.

  If nothing is printed and the script exits with code 0 (no error),
  then it can mean either that the program is running on bare-metal or
  the program is running inside a type of virtual machine which we don't
  know about or cannot detect.

  Current types of virtualization detected:

   - hyperv       Microsoft Hyper-V
   - kvm          Linux Kernel Virtual Machine (KVM)
   - openvz       OpenVZ or Virtuozzo
   - powervm_lx86 IBM PowerVM Lx86 Linux/x86 emulator
   - qemu         QEMU (unaccelerated)
   - uml          User-Mode Linux (UML)
   - virtage      Hitachi Virtualization Manager (HVM) Virtage LPAR
   - virtualbox   VirtualBox
   - virtualpc    Microsoft VirtualPC
   - vmware       VMware
   - xen          Xen
   - xen-dom0     Xen dom0 (privileged domain)
   - xen-domU     Xen domU (paravirtualized guest domain)
   - xen-hvm      Xen guest fully virtualized (HVM)


pkgId: 53a850b8679d81a3fc6f402a201c722c5ac2af76
name: virt-who
arch: noarch
version: 0.9
epoch: 0
release: 6.el5
summary: Agent for reporting virtual guest IDs to subscription-manager
url: https://fedorahosted.org/virt-who/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxdist02
rpm_sourcerpm: virt-who-0.9-6.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: virt-who-0.9-6.el5.noarch.rpm
checksum_type: sha
description:
  Agent that collects information about virtual guests present in the system and
  report them to the subscription manager.


pkgId: 0b5570068de85595dc593fa7d267b3357972c8a5
name: vixie-cron
arch: x86_64
version: 4.1
epoch: 4
release: 81.el5
summary: The Vixie cron daemon for executing specified programs at set times.
rpm_license: distributable
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: vixie-cron-4.1-81.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: vixie-cron-4.1-81.el5.x86_64.rpm
checksum_type: sha
description:
  The vixie-cron package contains the Vixie version of cron.  Cron is a
  standard UNIX daemon that runs specified programs at scheduled times.
  Vixie cron adds better security and more powerful configuration
  options to the standard version of cron.


pkgId: 5191dfc198de235b2641575f3327372733fec693
name: vlock
arch: x86_64
version: 1.3
epoch: 0
release: 23
summary: A program which locks one or more virtual consoles.
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: vlock-1.3-23.src.rpm
location_href: vlock-1.3-23.x86_64.rpm
checksum_type: sha
description:
  The vlock program locks one or more sessions on the console.  Vlock
  can lock the current terminal (local or remote) or the entire virtual
  console system, which completely disables all console access.  The
  vlock program unlocks when either the password of the user who started
  vlock or the root password is typed.

  Install vlock if you need to disable access to one console or to all
  virtual consoles.


pkgId: 39d3d2c28ca4d0cc68533b7906b7d1e0d8ed8a9d
name: vnc
arch: x86_64
version: 4.1.2
epoch: 0
release: 14.el5_6.6
summary: A remote display system.
url: http://www.realvnc.com
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/Desktops
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: vnc-4.1.2-14.el5_6.6.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: vnc-4.1.2-14.el5_6.6.x86_64.rpm
checksum_type: sha
description:
  Virtual Network Computing (VNC) is a remote display system which
  allows you to view a computing 'desktop' environment not only on the
  machine where it is running, but from anywhere on the Internet and
  from a wide variety of machine architectures.  This package contains a
  client which will allow you to connect to other desktops running a VNC
  server.


pkgId: 8c6332426ce1f2e8138ea5b82bd357e7a8b0fca9
name: vnc-server
arch: x86_64
version: 4.1.2
epoch: 0
release: 14.el5_6.6
summary: A VNC server.
url: http://www.realvnc.com
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: vnc-4.1.2-14.el5_6.6.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: vnc-server-4.1.2-14.el5_6.6.x86_64.rpm
checksum_type: sha
description:
  The VNC system allows you to access the same desktop from a wide
  variety of platforms.  This package is a VNC server, allowing others
  to access the desktop on your machine.


pkgId: c377f5b77bdbd4f12c794663e86e0d2658908e8e
name: vorbis-tools
arch: x86_64
version: 1.1.1
epoch: 1
release: 3.el5
summary: The Vorbis General Audio Compression Codec tools.
url: http://www.xiph.org/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Multimedia
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: vorbis-tools-1.1.1-3.el5.src.rpm
location_href: vorbis-tools-1.1.1-3.el5.x86_64.rpm
checksum_type: sha
description:
  Ogg Vorbis is a fully open, non-proprietary, patent- and royalty-free,
  general-purpose compressed audio format for audio and music at fixed
  and variable bitrates from 16 to 128 kbps/channel.

  The vorbis package contains an encoder, a decoder, a playback tool, and a
  comment editor.


pkgId: bb7a811634db80de338583e613e9fc0d129e9e87
name: vte-devel
arch: i386
version: 0.14.0
epoch: 0
release: 2.el5
summary: Files needed for developing applications which use vte
rpm_license: LGPL
rpm_vendor: Scientific Linux
rpm_group: Development/Libraries
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: vte-0.14.0-2.el5.src.rpm
location_href: vte-devel-0.14.0-2.el5.i386.rpm
checksum_type: sha
description:
  VTE is a terminal emulator widget for use with GTK+ 2.0.  This
  package contains the files needed for building applications using VTE.


pkgId: 63bdf5d3ac7c4fb950f951db7f8100e9ce41ce80
name: w3m
arch: x86_64
version: 0.5.1
epoch: 0
release: 18.el5
summary: A pager with Web browsing abilities.
url: http://w3m.sourceforge.net/
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: w3m-0.5.1-18.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: w3m-0.5.1-18.el5.x86_64.rpm
checksum_type: sha
description:
  The w3m program is a pager (or text file viewer) that can also be used
  as a text-mode Web browser. W3m features include the following: when
  reading an HTML document, you can follow links and view images using
  an external image viewer; its internet message mode determines the
  type of document from the header; if the Content-Type field of the
  document is text/html, the document is displayed as an HTML document;
  you can change a URL description like 'http://hogege.net' in plain
  text into a link to that URL.
  If you want to display the inline images on w3m, you need to install
  w3m-img package as well.


pkgId: a0b473c1a6911d39727bcbbc7d2818a620b750dc
name: w3m-img
arch: x86_64
version: 0.5.1
epoch: 0
release: 18.el5
summary: A helper program to display the inline images for w3m
url: http://w3m.sourceforge.net/
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: w3m-0.5.1-18.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: w3m-img-0.5.1-18.el5.x86_64.rpm
checksum_type: sha
description:
  w3m-img package provides a helper program for w3m to display the inline
  images on the terminal emulator in X Window System environments and the
  linux framebuffer.


pkgId: 1b55f3521a21f27e2dc6a865ce8a790e4f0b2852
name: wacomexpresskeys
arch: x86_64
version: 0.4.1
epoch: 0
release: 2.el5
summary: Wacom ExpressKeys and Touch Strips configuration utility
url: http://web.telia.com/~u45802013/wacom/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: wacomexpresskeys-0.4.1-2.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: wacomexpresskeys-0.4.1-2.el5.x86_64.rpm
checksum_type: sha
description:
  Configuration utility to bind Wacom tablet's ExpressKeys and Touch Strips to
  generate other input events.


pkgId: 3dde48838db97c0a863df634cadd9c63c46abd2c
name: watchdog
arch: x86_64
version: 5.6
epoch: 0
release: 1.el5
summary: Software and/or Hardware watchdog daemon
url: http://sourceforge.net/projects/watchdog/
rpm_license: GPL+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Daemons
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: watchdog-5.6-1.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: watchdog-5.6-1.el5.x86_64.rpm
checksum_type: sha
description:
  The watchdog program can be used as a powerful software watchdog daemon
  or may be alternately used with a hardware watchdog device such as the
  IPMI hardware watchdog driver interface to a resident Baseboard
  Management Controller (BMC).  watchdog periodically writes to /dev/watchdog;
  the interval between writes to /dev/watchdog is configurable through settings
  in the watchdog sysconfig file.  This configuration file is also used to
  set the watchdog to be used as a hardware watchdog instead of its default
  software watchdog operation.  In either case, if the device is open but not
  written to within the configured time period, the watchdog timer expiration
  will trigger a machine reboot. When operating as a software watchdog, the
  ability to reboot will depend on the state of the machine and interrupts.
  When operating as a hardware watchdog, the machine will experience a hard
  reset (or whatever action was configured to be taken upon watchdog timer
  expiration) initiated by the BMC.


pkgId: ccc67760f02520d3691917916ed1b5b22552746e
name: wdaemon
arch: x86_64
version: 0.14
epoch: 0
release: 8
summary: Hotplug helper for Wacom X.org driver
url: http://jake.ruivo.org/~aris/wdaemon/
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X Hardware Support
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: wdaemon-0.14-8.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: wdaemon-0.14-8.x86_64.rpm
checksum_type: sha
description:
  Helper application which emulates persistent input devices for Wacom tablets
  so they can be plugged and unplugged while X.org server is running. This should
  go away as soon X.org properly supports hotplugging.


pkgId: 0b69d56d9b574f395c95cee7a1d4924b2c4f34d6
name: webalizer
arch: x86_64
version: 2.01_10
epoch: 0
release: 30.1
summary: A flexible Web server log file analysis program.
url: http://www.mrunix.net/webalizer/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Internet
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: webalizer-2.01_10-30.1.src.rpm
location_href: webalizer-2.01_10-30.1.x86_64.rpm
checksum_type: sha
description:
  The Webalizer is a Web server log analysis program. It is designed to
  scan Web server log files in various formats and produce usage
  statistics in HTML format for viewing through a browser. It produces
  professional looking graphs which make analyzing when and where your
  Web traffic is coming from easy.


pkgId: b2dd7673a1966cf050d1f829862a97d30262e97d
name: werken-xpath
arch: x86_64
version: 0.9.4
epoch: 0
release: 0.beta.12jpp.1
summary: XPath implementation using JDOM
url: http://sourceforge.net/projects/werken-xpath/
rpm_license: Apache Software License-like
rpm_vendor: Scientific Linux
rpm_group: Development/Libraries/Java
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: werken-xpath-0.9.4-0.beta.12jpp.1.src.rpm
location_href: werken-xpath-0.9.4-0.beta.12jpp.1.x86_64.rpm
checksum_type: sha
description:
  werken.xpath is an implementation of the W3C XPath Recommendation, on
  top of the JDOM library.  It takes as input a XPath expression, and a
  JDOM tree, and returns a NodeSet (java.util.List) of selected
  elements.  Is is being used in the development of the
  as-yet-unreleased werken.xslt (eXtensible Stylesheet Language) and the
  werken.canonical (XML canonicalization) packages.


pkgId: 3af9335cb3704e3372cb9c85e84f9dedc36223f7
name: wget
arch: x86_64
version: 1.11.4
epoch: 0
release: 3.el5_8.2
summary: A utility for retrieving files using the HTTP or FTP protocols.
url: http://wget.sunsite.dk/
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxbslc4-amd64.cern.ch
rpm_sourcerpm: wget-1.11.4-3.el5_8.2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: wget-1.11.4-3.el5_8.2.x86_64.rpm
checksum_type: sha
description:
  GNU Wget is a file retrieval utility which can use either the HTTP or
  FTP protocols. Wget features include the ability to work in the
  background while you are logged out, recursive retrieval of
  directories, file name wildcard matching, remote file timestamp
  storage and comparison, use of Rest with FTP servers and Range with
  HTTP servers to retrieve files over slow or unstable connections,
  support for Proxy servers, and configurability.


pkgId: 5c4513b2230f31d887e16de1c2d31ec4dbe70d91
name: which
arch: x86_64
version: 2.16
epoch: 0
release: 7
summary: Displays where a particular program in your path is located.
url: http://www.xs4all.nl/~carlo17/which/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: which-2.16-7.src.rpm
location_href: which-2.16-7.x86_64.rpm
checksum_type: sha
description:
  The which command shows the full pathname of a specified program, if
  the specified program is in your PATH.


pkgId: d4f332e861a7ccf5df2af162edab6373a9092b8c
name: wireless-tools
arch: i386
version: 28
epoch: 1
release: 2.el5
summary: Wireless ethernet configuration tools
url: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: System Environment/Base
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: wireless-tools-28-2.el5.src.rpm
location_href: wireless-tools-28-2.el5.i386.rpm
checksum_type: sha
description:
  This package contain the Wireless tools, used to manipulate
  the Wireless Extensions. The Wireless Extension is an interface
  allowing you to set Wireless LAN specific parameters and get the
  specific stats for wireless networking equipment.


pkgId: 03b9d9e128277423414a525bc880d32a60145d94
name: wireshark
arch: x86_64
version: 1.0.15
epoch: 0
release: 6.el5_10
summary: Network traffic analyzer
url: http://www.wireshark.org/
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxdist01
rpm_sourcerpm: wireshark-1.0.15-6.el5_10.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: wireshark-1.0.15-6.el5_10.x86_64.rpm
checksum_type: sha
description:
  Wireshark is a network traffic analyzer for Unix-ish operating systems.

  This package lays base for libpcap, a packet capture and filtering
  library, contains command-line utilities, contains plugins and
  documentation for wireshark. A graphical user interface is packaged
  separately to GTK+ package.


pkgId: a154b4579b3e2ca684e6d1481535d53618854d3d
name: words
arch: noarch
version: 3.0
epoch: 0
release: 9.1
summary: A dictionary of English words for the /usr/share/dict directory.
url: http://www.dcs.shef.ac.uk/research/ilash/Moby/
rpm_license: public domain
rpm_vendor: Scientific Linux
rpm_group: System Environment/Libraries
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: words-3.0-9.1.src.rpm
location_href: words-3.0-9.1.noarch.rpm
checksum_type: sha
description:
  The words file is a dictionary of English words for the
  /usr/share/dict directory. Some programs use this database of
  words to check spelling. Password checkers use it to look for bad
  passwords.


pkgId: 4b3ebf3a1ce2c604182705caa7d3b508293772db
name: wpa_supplicant
arch: x86_64
version: 0.5.10
epoch: 1
release: 10.el5
summary: WPA/WPA2/IEEE 802.1X Supplicant
url: http://w1.fi/wpa_supplicant/
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxdist02
rpm_sourcerpm: wpa_supplicant-0.5.10-10.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: wpa_supplicant-0.5.10-10.el5.x86_64.rpm
checksum_type: sha
description:
  wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with support
  for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA
  component that is used in the client stations. It implements key negotiation
  with a WPA Authenticator and it controls the roaming and IEEE 802.11
  authentication/association of the wlan driver.


pkgId: 59ee92372581a340c6731d44067e444ab2a2f34b
name: wsdl4j
arch: x86_64
version: 1.5.2
epoch: 0
release: 4jpp.1
summary: Web Services Description Language Toolkit for Java
url: http://sourceforge.net/projects/wsdl4j
rpm_license: IBM Common Public License
rpm_vendor: Scientific Linux
rpm_group: Text Processing/Markup/XML
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: wsdl4j-1.5.2-4jpp.1.src.rpm
location_href: wsdl4j-1.5.2-4jpp.1.x86_64.rpm
checksum_type: sha
description:
  The Web Services Description Language for Java Toolkit (WSDL4J) allows the
  creation, representation, and manipulation of WSDL documents describing
  services.  This codebase will eventually serve as a reference implementation
  of the standard created by JSR110.


pkgId: 8d368d833b0176fd4c56cc2743173442bfe75c88
name: wvdial
arch: x86_64
version: 1.54.0
epoch: 0
release: 5.2.2.1
summary: A heuristic autodialer for PPP connections.
url: http://open.nit.ca/wvdial/
rpm_license: LGPL
rpm_vendor: Scientific Linux
rpm_group: System Environment/Daemons
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: wvdial-1.54.0-5.2.2.1.src.rpm
location_href: wvdial-1.54.0-5.2.2.1.x86_64.rpm
checksum_type: sha
description:
  WvDial automatically locates and configures modems and can log into
  almost any ISP's server without special configuration. You need to
  input the username, password, and phone number, and then WvDial will
  negotiate the PPP connection using any mechanism needed.


pkgId: b4ae939405bf0b867cfe8a35ce11dc3983c86356
name: x3270
arch: x86_64
version: 3.3.4p7
epoch: 0
release: 3.el5.4
summary: An X Window System based IBM 3278/3279 terminal emulator
url: http://www.geocities.com/SiliconValley/Peaks/7814
rpm_license: MIT
rpm_vendor: Scientific Linux
rpm_group: Applications/Internet
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: x3270-3.3.4p7-3.el5.4.src.rpm
location_href: x3270-3.3.4p7-3.el5.4.x86_64.rpm
checksum_type: sha
description:
  The x3270 package contains files needed for emulating the IBM 3278/3279
  terminals, commonly used with mainframe applications.

  You will also need to install a frontend for x3270. Available frontends
  are x3270-x11 (for the X Window System) and x3270-text (for text mode).


pkgId: aae5c2eedcff658758cbea91bb4185a8ed866f78
name: x3270-text
arch: x86_64
version: 3.3.4p7
epoch: 0
release: 3.el5.4
summary: IBM 3278/3279 terminal emulator for text mode
url: http://www.geocities.com/SiliconValley/Peaks/7814
rpm_license: MIT
rpm_vendor: Scientific Linux
rpm_group: Applications/Internet
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: x3270-3.3.4p7-3.el5.4.src.rpm
location_href: x3270-text-3.3.4p7-3.el5.4.x86_64.rpm
checksum_type: sha
description:
  The c3270 program opens a 3270 terminal which emulates the actual look of an
  IBM 3278/3279 terminal, commonly used with mainframe applications.
  x3270 also allows you to telnet to an IBM host from the x3270 window.

  Install the x3270-text package if you need to access IBM hosts using an IBM
  3278/3279 terminal emulator without running X.


pkgId: 7c08d865dfc252e951db226c79de57a8862ee15b
name: x3270-x11
arch: x86_64
version: 3.3.4p7
epoch: 0
release: 3.el5.4
summary: IBM 3278/3279 terminal emulator for the X Window System
url: http://www.geocities.com/SiliconValley/Peaks/7814
rpm_license: MIT
rpm_vendor: Scientific Linux
rpm_group: Applications/Internet
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: x3270-3.3.4p7-3.el5.4.src.rpm
location_href: x3270-x11-3.3.4p7-3.el5.4.x86_64.rpm
checksum_type: sha
description:
  The x3270 program opens a window in the X Window System which emulates
  the actual look of an IBM 3278/3279 terminal, commonly used with
  mainframe applications.  x3270 also allows you to telnet to an IBM
  host from the x3270 window.

  Install the x3270-x11 package if you need to access IBM hosts using an IBM
  3278/3279 terminal emulator from X11.


pkgId: c95ce48e0f17b5fd5316b5c4250c03e100878d7f
name: x86info
arch: x86_64
version: 1.20
epoch: 1
release: 1.26.fc6
summary: x86 processor information tool.
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: System Environment/Base
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: x86info-1.20-1.26.fc6.src.rpm
location_href: x86info-1.20-1.26.fc6.x86_64.rpm
checksum_type: sha
description:
  x86info displays diagnostic information about x86 processors, such
  as cache configuration and supported features.


pkgId: dacb745d4a1c524cfffc652d6b06395e8cc21102
name: xalan-j2
arch: x86_64
version: 2.7.0
epoch: 0
release: 6jpp.2
summary: Java XSLT processor
url: http://xalan.apache.org/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Text Processing/Markup/XML
rpm_buildhost: lxdist01
rpm_sourcerpm: xalan-j2-2.7.0-6jpp.2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xalan-j2-2.7.0-6jpp.2.x86_64.rpm
checksum_type: sha
description:
  Xalan is an XSLT processor for transforming XML documents into HTML,
  text, or other XML document types. It implements the W3C Recommendations
  for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
  be used from the command line, in an applet or a servlet, or as a module
  in other program.


pkgId: 42a86064c5128180eb91629b607c542f5d258e61
name: xalan-j2-xsltc
arch: x86_64
version: 2.7.0
epoch: 0
release: 6jpp.2
summary: XSLT compiler
url: http://xalan.apache.org/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Text Processing/Markup/XML
rpm_buildhost: lxdist01
rpm_sourcerpm: xalan-j2-2.7.0-6jpp.2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xalan-j2-xsltc-2.7.0-6jpp.2.x86_64.rpm
checksum_type: sha
description:
  The XSLT Compiler is a Java-based tool for compiling XSLT stylesheets into
  lightweight and portable Java byte codes called translets.


pkgId: 65d5b591ae53c803fc930d8184582308066f82c4
name: xcdroast
arch: x86_64
version: 0.98a15
epoch: 0
release: 12.2.2
summary: An X Window System based tool for creating CDs.
url: http://www.xcdroast.org/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Multimedia
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xcdroast-0.98a15-12.2.2.src.rpm
location_href: xcdroast-0.98a15-12.2.2.x86_64.rpm
checksum_type: sha
description:
  X-CD-Roast provides a GUI interface for commands like cdrecord and
  mkisofs. X-CD-Roast includes a self-explanatory X11 user interface,
  automatic SCSI and IDE hardware setup, support for mastering of new
  ISO9660 data CDs, support for production of new audio CDs, fast
  copying of CDs without hard disk buffering, and a logfile option.


pkgId: 25713947af50228736884df568120f2059b2219d
name: xdelta
arch: i386
version: 1.1.3
epoch: 0
release: 20
summary: A binary file delta generator and an RCS replacement library.
url: http://sourceforge.net/projects/xdelta/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Development/Tools
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xdelta-1.1.3-20.src.rpm
location_href: xdelta-1.1.3-20.i386.rpm
checksum_type: sha
description:
  Xdelta (X for XCF: the eXperimental Computing Facility at Berkeley) is
  a binary delta generator (like a diff program for binaries) and an RCS
  version control replacement library. The Xdelta library performs its
  work independently of the actual format used to encode the file and is
  intended to be used by various higher-level programs such as XCF's
  Project Revision Control System (PRCS).  PRCS is a front end for a
  version control toolset.  Xdelta uses a binary file delta algorithm to
  replace the standard diff program used by RCS.


pkgId: b80da38ddd56fe3ca8efee5975333f38115ddc19
name: xdelta-devel
arch: i386
version: 1.1.3
epoch: 0
release: 20
summary: Static library and header files for Xdelta development.
url: http://sourceforge.net/projects/xdelta/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Development/Libraries
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xdelta-1.1.3-20.src.rpm
location_href: xdelta-devel-1.1.3-20.i386.rpm
checksum_type: sha
description:
  The Xdelta-devel package contains the static library and header files
  needed for developing Xdelta-based applications.


pkgId: f4d2f0ff5369301653345abbe820d86c5512504a
name: xen
arch: x86_64
version: 3.0.3
epoch: 0
release: 142.el5_9.3
summary: Xen is a virtual machine monitor
url: http://www.cl.cam.ac.uk/Research/SRG/netos/xen/index.html
rpm_license: GPLv2+, LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxdist03
rpm_sourcerpm: xen-3.0.3-142.el5_9.3.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xen-3.0.3-142.el5_9.3.x86_64.rpm
checksum_type: sha
description:
  This package contains the Xen tools and management daemons needed
  to run virtual machines on x86, x86_64, and ia64 systems.
  Information on how to use Xen can be found at the Xen project pages.

  The Xen system also requires the Xen hypervisor and domain-0
  kernel, which can be found in the kernel-xen* package.

  Virtualization can be used to run multiple operating systems on one
  physical system, for purposes of hardware consolidation, hardware
  abstraction, or to test untrusted applications in a sandboxed
  environment.


pkgId: 3febc1de47ff72691b48bca8cf3e8e88d5ef9d8e
name: xerces-j2
arch: x86_64
version: 2.7.1
epoch: 0
release: 7jpp.2.el5_4.2
summary: Java XML parser
url: http://xerces.apache.org/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Text Processing/Markup/XML
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xerces-j2-2.7.1-7jpp.2.el5_4.2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xerces-j2-2.7.1-7jpp.2.el5_4.2.x86_64.rpm
checksum_type: sha
description:
  Welcome to the future! Xerces2 is the next generation of high
  performance, fully compliant XML parsers in the Apache Xerces family.
  This new version of Xerces introduces the Xerces Native Interface (XNI),
  a complete framework for building parser components and configurations
  that is extremely modular and easy to program.

  The Apache Xerces2 parser is the reference implementation of XNI but
  other parser components, configurations, and parsers can be written
  using the Xerces Native Interface. For complete design and
  implementation documents, refer to the XNI Manual.

  Xerces 2 is a fully conforming XML Schema processor. For more
  information, refer to the XML Schema page.

  Xerces 2 also provides a partial implementation of Document Object Model
  Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
  Drafts. For more information, refer to the DOM Level 3 Implementation
  page.


pkgId: 9f8869d155a428b6f362ffcff82abd555ec3ce36
name: xfig
arch: x86_64
version: 3.2.4
epoch: 0
release: 21.3.el5
summary: An X Window System tool for drawing basic vector graphics.
url: http://www.xfig.org/
rpm_license: Freeware
rpm_vendor: Scientific Linux
rpm_group: Applications/Multimedia
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xfig-3.2.4-21.3.el5.src.rpm
location_href: xfig-3.2.4-21.3.el5.x86_64.rpm
checksum_type: sha
description:
  Xfig is an X Window System tool for creating basic vector graphics,
  including bezier curves, lines, rulers and more.  The resulting
  graphics can be saved, printed on PostScript printers or converted to
  a variety of other formats (e.g., X11 bitmaps, Encapsulated
  PostScript, LaTeX).

  You should install xfig if you need a simple program to create vector
  graphics.


pkgId: 684d0dc011989b8f9dd26be6595aa1f004a3cc93
name: xfs-fs
arch: x86_64
version: 0.4
epoch: 0
release: 4.slc5
summary: The XFS(tm) Filesystem from Silicon Graphics, Inc.
url: http://oss.sgi.com/projects/xfs
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Kernel
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xfs-fs-0.4-4.slc5.src.rpm
rpm_packager: Urs Beyerle <urs.beyerle@psi.ch>
location_href: xfs-fs-0.4-4.slc5.x86_64.rpm
checksum_type: sha
description:
  The XFS(tm) Filesystem from Silicon Graphics, Inc.
  XFS is a highly scalable, high-performance journaling filesystem that provides
  rapid recovery from system crashes.

  Kernel modules for xfs-fs are in kernel-module-xfs rpms.


pkgId: 03d05e4cd7a27acea7d6c0ef5e93feea8c44443d
name: xfsdump
arch: x86_64
version: 3.0.2
epoch: 0
release: 1
summary: Administrative utilities for the XFS filesystem.
url: http://oss.sgi.com/projects/xfs/
rpm_license: GPL
rpm_vendor: Silicon Graphics, Inc.
rpm_group: Applications/Archiving
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xfsdump-3.0.2-1.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xfsdump-3.0.2-1.x86_64.rpm
checksum_type: sha
description:
  The xfsdump package contains xfsdump, xfsrestore and a number of
  other utilities for administering XFS filesystems.

  xfsdump examines files in a filesystem, determines which need to be
  backed up, and copies those files to a specified disk, tape or other
  storage medium.  It uses XFS-specific directives for optimizing the
  dump of an XFS filesystem, and also knows how to backup XFS extended
  attributes.  Backups created with xfsdump are "endian safe" and can
  thus be transfered between Linux machines of different architectures
  and also between IRIX machines.

  xfsrestore performs the inverse function of xfsdump; it can restore a
  full backup of a filesystem.  Subsequent incremental backups can then
  be layered on top of the full backup.  Single files and directory
  subtrees may be restored from full or partial backups.


pkgId: b18c670eabc55fd598ad8b74055e2c9b9589f664
name: xfsprogs
arch: x86_64
version: 3.0.3
epoch: 0
release: 1
summary: Utilities for managing the XFS filesystem.
url: http://oss.sgi.com/projects/xfs/
rpm_license: GPL
rpm_vendor: Silicon Graphics, Inc.
rpm_group: System Environment/Base
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xfsprogs-3.0.3-1.src.rpm
rpm_packager: Silicon Graphics, Inc. <http://www.sgi.com/>
location_href: xfsprogs-3.0.3-1.x86_64.rpm
checksum_type: sha
description:
  A set of commands to use the XFS filesystem, including mkfs.xfs.

  XFS is a high performance journaling filesystem which originated
  on the SGI IRIX platform.  It is completely multi-threaded, can
  support large files and large filesystems, extended attributes,
  variable block sizes, is extent based, and makes extensive use of
  Btrees (directories, extents, free space) to aid both performance
  and scalability.

  Refer to the documentation at http://oss.sgi.com/projects/xfs/
  for complete details.  This implementation is on-disk compatible
  with the IRIX version of XFS.


pkgId: 1606a2f4949cb8ef3e8d33daa1d1d9dc94dcb097
name: xfsprogs-devel
arch: x86_64
version: 3.0.3
epoch: 0
release: 1
summary: XFS filesystem-specific static libraries and headers.
url: http://oss.sgi.com/projects/xfs/
rpm_license: GPL
rpm_vendor: Silicon Graphics, Inc.
rpm_group: Development/Libraries
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xfsprogs-3.0.3-1.src.rpm
rpm_packager: Silicon Graphics, Inc. <http://www.sgi.com/>
location_href: xfsprogs-devel-3.0.3-1.x86_64.rpm
checksum_type: sha
description:
  xfsprogs-devel contains the libraries and header files needed to
  develop XFS filesystem-specific programs.

  You should install xfsprogs-devel if you want to develop XFS
  filesystem-specific programs,  If you install xfsprogs-devel, you'll
  also want to install xfsprogs.


pkgId: 16911a47e9022a6aaa449914fdfd7ad011eb0d0c
name: xhtml1-dtds
arch: noarch
version: 1.0
epoch: 0
release: 7.1.1
summary: XML document type definition for XHTML 1.0
url: http://www.w3.org/TR/xhtml1/
rpm_license: W3C IPR
rpm_vendor: Scientific Linux
rpm_group: Applications/Text
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xhtml1-dtds-1.0-7.1.1.src.rpm
location_href: xhtml1-dtds-1.0-7.1.1.noarch.rpm
checksum_type: sha
description:
  This provides the DTDs of the Second Edition of XHTML 1.0, a reformulation
  of HTML 4 as an XML 1.0 application, and three DTDs corresponding to the
  ones defined by HTML 4. The semantics of the elements and their attributes
  are defined in the W3C Recommendation for HTML 4. These semantics provide
  the foundation for future extensibility of XHTML.


pkgId: 3a96b8951f9091e1dea18ef15ac3ee9f9657c3e7
name: xinetd
arch: x86_64
version: 2.3.14
epoch: 2
release: 20.el5_10
summary: A secure replacement for inetd.
url: http://www.xinetd.org
rpm_license: xinetd
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Daemons
rpm_buildhost: lxdist02
rpm_sourcerpm: xinetd-2.3.14-20.el5_10.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xinetd-2.3.14-20.el5_10.x86_64.rpm
checksum_type: sha
description:
  Xinetd is a secure replacement for inetd, the Internet services
  daemon. Xinetd provides access control for all services based on the
  address of the remote host and/or on time of access and can prevent
  denial-of-access attacks. Xinetd provides extensive logging, has no
  limit on the number of server arguments, and lets you bind specific
  services to specific IP addresses on your host machine. Each service
  has its own specific configuration file for Xinetd; the files are
  located in the /etc/xinetd.d directory.


pkgId: 2ecc7879e89ae41e83c1f5cfcfaf4d81f928a4fa
name: xisdnload
arch: x86_64
version: 3.2
epoch: 0
release: 56.el5
summary: An ISDN connection load average display for the X Window System.
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: isdn4k-utils-3.2-56.el5.src.rpm
location_href: xisdnload-3.2-56.el5.x86_64.rpm
checksum_type: sha
description:
  The xisdnload utility displays a periodically updated histogram of the
  load average over your ISDN connection.


pkgId: d9e6f5888a3a29903bdfe1cec1dfdea21def90ec
name: xjavadoc
arch: x86_64
version: 1.1
epoch: 0
release: 4jpp.1
summary: The XJavaDoc engine
url: http://xdoclet.sourceforge.net/xjavadoc/
rpm_license: BSD Style
rpm_vendor: Scientific Linux
rpm_group: Development/Testing
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xjavadoc-1.1-4jpp.1.src.rpm
location_href: xjavadoc-1.1-4jpp.1.x86_64.rpm
checksum_type: sha
description:
  The XJavaDoc engine is a complete rewrite of Sun's
  JavaDoc engine that is faster and more suited for
  XDoclet (although it is completely standalone). It
  scans java source code and makes information about
  a class available via special java beans that are
  part of the XJavaDoc core. These beans provide the
  same information about a class as Sun's JavaDoc API,
  and some nice extra features.


pkgId: 94253158bb8227254c7d883d042638247cfdfd0f
name: xml-common
arch: noarch
version: 0.6.3
epoch: 0
release: 18
summary: Common XML catalog and DTD files.
url: http://www.iso.ch/cate/3524030.html
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Text
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: sgml-common-0.6.3-18.src.rpm
location_href: xml-common-0.6.3-18.noarch.rpm
checksum_type: sha
description:
  The xml-common package contains a collection of entities and DTDs
  that are useful for processing XML, but that don't need to be
  included in multiple packages.


pkgId: 385121b3dbf7de1a5cfc59e01609c18008f85602
name: xml-commons
arch: x86_64
version: 1.3.02
epoch: 0
release: 0.b2.7jpp.10
summary: Common code for XML projects
url: http://xml.apache.org/commons/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux
rpm_group: Text Processing/Markup/XML
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xml-commons-1.3.02-0.b2.7jpp.10.src.rpm
location_href: xml-commons-1.3.02-0.b2.7jpp.10.x86_64.rpm
checksum_type: sha
description:
  xml-commons is focused on common code and guidelines for xml projects.
  It's first focus will be to organize and have common packaging for the
  various externally-defined standards code relating to XML - things like
  the DOM, SAX, and JAXP interfaces.
  As the xml-commons community forms, we also hope to serve as a holding
  area for other common xml-related utilities and code, and to help
  promulgate common packaging, testing, documentation, and other
  guidelines across all xml.apache.org subprojects.


pkgId: f30bbf3bbdb24adc822776184cd586322abc64c3
name: xmlrpc
arch: x86_64
version: 2.0.1
epoch: 0
release: 3jpp.1
summary: Java XML-RPC implementation
url: http://xml.apache.org/xmlrpc/
rpm_license: Apache Software License
rpm_vendor: Scientific Linux
rpm_group: Development/Java
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xmlrpc-2.0.1-3jpp.1.src.rpm
location_href: xmlrpc-2.0.1-3jpp.1.x86_64.rpm
checksum_type: sha
description:
  Apache XML-RPC is a Java implementation of XML-RPC, a popular protocol
  that uses XML over HTTP to implement remote procedure calls.
  Apache XML-RPC was previously known as Helma XML-RPC. If you have code
  using the Helma library, all you should have to do is change the import
  statements in your code from helma.xmlrpc.* to org.apache.xmlrpc.*.


pkgId: 5bc115be5f5850855788b1ca68ac022bf4b5077b
name: xmlrpc-c
arch: x86_64
version: 1.16.24
epoch: 0
release: 1206.1840.4.el5
summary: A lightweight RPC library based on XML and HTTP
url: http://xmlrpc-c.sourceforge.net/
rpm_license: BSD and MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: xmlrpc-c-1.16.24-1206.1840.4.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xmlrpc-c-1.16.24-1206.1840.4.el5.x86_64.rpm
checksum_type: sha
description:
  XML-RPC is a quick-and-easy way to make procedure calls over the
  Internet. It converts the procedure call into XML document, sends it
  to a remote server using HTTP, and gets back the response as XML.

  This library provides a modular implementation of XML-RPC for C.


pkgId: cbe148d84f8aa15d014834170398c7f21dc74a32
name: xmlrpc-c-apps
arch: x86_64
version: 1.16.24
epoch: 0
release: 1206.1840.4.el5
summary: Sample XML-RPC applications
url: http://xmlrpc-c.sourceforge.net/
rpm_license: BSD and MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: xmlrpc-c-1.16.24-1206.1840.4.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xmlrpc-c-apps-1.16.24-1206.1840.4.el5.x86_64.rpm
checksum_type: sha
description:
  XML-RPC is a quick-and-easy way to make procedure calls over the
  Internet. It converts the procedure call into XML document, sends it
  to a remote server using HTTP, and gets back the response as XML.

  This package contains some handy XML-RPC demo applications.


pkgId: c1f815766ff7999abfedc1e98892f769f6f431f3
name: xmlrpc-c-c++
arch: x86_64
version: 1.16.24
epoch: 0
release: 1206.1840.4.el5
summary: C++ libraries for xmlrpc-c
url: http://xmlrpc-c.sourceforge.net/
rpm_license: BSD and MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: xmlrpc-c-1.16.24-1206.1840.4.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xmlrpc-c-c++-1.16.24-1206.1840.4.el5.x86_64.rpm
checksum_type: sha
description:
  XML-RPC is a quick-and-easy way to make procedure calls over the
  Internet. It converts the procedure call into XML document, sends it
  to a remote server using HTTP, and gets back the response as XML.

  This library provides a modular implementation of XML-RPC for C++.


pkgId: 4bfdefeafd78294b69ecc08530ab858b4ff66ca6
name: xmlrpc-c-client++
arch: x86_64
version: 1.16.24
epoch: 0
release: 1206.1840.4.el5
summary: C++ client libraries for xmlrpc-c
url: http://xmlrpc-c.sourceforge.net/
rpm_license: BSD and MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: xmlrpc-c-1.16.24-1206.1840.4.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xmlrpc-c-client++-1.16.24-1206.1840.4.el5.x86_64.rpm
checksum_type: sha
description:
  XML-RPC is a quick-and-easy way to make procedure calls over the
  Internet. It converts the procedure call into XML document, sends it
  to a remote server using HTTP, and gets back the response as XML.

  This library provides a modular implementation of XML-RPC for C++
  clients.


pkgId: 7ab0302a9c4d4ad46769fcd2d8d840812b62643d
name: xmlrpc-c-client
arch: x86_64
version: 1.16.24
epoch: 0
release: 1206.1840.4.el5
summary: C client libraries for xmlrpc-c
url: http://xmlrpc-c.sourceforge.net/
rpm_license: BSD and MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: xmlrpc-c-1.16.24-1206.1840.4.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xmlrpc-c-client-1.16.24-1206.1840.4.el5.x86_64.rpm
checksum_type: sha
description:
  XML-RPC is a quick-and-easy way to make procedure calls over the
  Internet. It converts the procedure call into XML document, sends it
  to a remote server using HTTP, and gets back the response as XML.

  This library provides a modular implementation of XML-RPC for C
  clients.


pkgId: a4ff18f582e1b7de57e0ebed77871c2f383616ed
name: xmlsec1
arch: i386
version: 1.2.9
epoch: 0
release: 8.1.2
summary: Library providing support for "XML Signature" and "XML Encryption" standards
url: http://www.aleksey.com/xmlsec/
rpm_license: MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxvmslc5-i386.cern.ch
rpm_sourcerpm: xmlsec1-1.2.9-8.1.2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xmlsec1-1.2.9-8.1.2.i386.rpm
checksum_type: sha
description:
  XML Security Library is a C library based on LibXML2  and OpenSSL.
  The library was created with a goal to support major XML security
  standards "XML Digital Signature" and "XML Encryption".


pkgId: 81611594f00d2c617ffd10580eef7dda50ddb430
name: xmlsec1-devel
arch: i386
version: 1.2.9
epoch: 0
release: 8.1.2
url: http://www.aleksey.com/xmlsec/
rpm_license: MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxvmslc5-i386.cern.ch
rpm_sourcerpm: xmlsec1-1.2.9-8.1.2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xmlsec1-devel-1.2.9-8.1.2.i386.rpm
checksum_type: sha
summary:
  Libraries, includes, etc. to develop applications with XML Digital Signatures and XML Encryption support.

description:
  Libraries, includes, etc. you can use to develop applications with XML Digital
  Signatures and XML Encryption support.


pkgId: dbc3039b75fda309467e656dcc018f1792f88a71
name: xmlsec1-openssl
arch: i386
version: 1.2.9
epoch: 0
release: 8.1.2
summary: OpenSSL crypto plugin for XML Security Library
url: http://www.aleksey.com/xmlsec/
rpm_license: MIT
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxvmslc5-i386.cern.ch
rpm_sourcerpm: xmlsec1-1.2.9-8.1.2.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xmlsec1-openssl-1.2.9-8.1.2.i386.rpm
checksum_type: sha
description:
  OpenSSL plugin for XML Security Library provides OpenSSL based crypto services
  for the xmlsec library


pkgId: 9282ab5364ed0c420144159a8579d9081e50ab5f
name: xorg-x11-drivers
arch: x86_64
version: 7.1
epoch: 0
release: 4.2.el5
summary: X.Org X11 driver installation package
url: http://www.redhat.com
rpm_license: MIT/X11
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X Hardware Support
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xorg-x11-drivers-7.1-4.2.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xorg-x11-drivers-7.1-4.2.el5.x86_64.rpm
checksum_type: sha
description:
  The purpose of this package is to require all of the individual X.Org
  driver rpms, to allow the OS installation software to install all drivers
  all at once, without having to track which individual drivers are present
  on each architecture.  By installing this package, it forces all of the
  individual driver packages to be installed.


pkgId: 85cebc98c63f3b9de8de730a7811de5527c4c011
name: xorg-x11-filesystem
arch: noarch
version: 7.1
epoch: 0
release: 2.fc6
summary: X.Org X11 filesystem layout
url: http://www.redhat.com
rpm_license: MIT/X11
rpm_vendor: Scientific Linux
rpm_group: System Environment/Base
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xorg-x11-filesystem-7.1-2.fc6.src.rpm
location_href: xorg-x11-filesystem-7.1-2.fc6.noarch.rpm
checksum_type: sha
description:
  This package provides some directories which are required by other
  packages which comprise the modularized X.Org X11R7 X Window System
  release.  This package must be installed during OS installation
  or upgrade, in order to force the creation of these directories,
  and replace any legacy symbolic links that might be present in old
  locations, which could result in upgrade failures.


pkgId: a507507b7b27c7c707c9af600ab5b1c7ed6bb7b6
name: xqilla
arch: x86_64
version: 2.0.0
epoch: 0
release: 5.el5
summary: XQilla is an XQuery and XPath 2.0 library, built on top of Xerces-C
url: http://xqilla.sourceforge.net/HomePage
rpm_license: ASL 2.0
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxvmslc5-amd64.cern.ch
rpm_sourcerpm: xqilla-2.0.0-5.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xqilla-2.0.0-5.el5.x86_64.rpm
checksum_type: sha
description:
  XQilla is an XQuery and XPath 2.0 implementation written in C++ and based
  on Xerces-C. It implements the DOM 3 XPath API, as well as having it's own
  more powerful API. It conforms to the W3C proposed recomendation of XQuery
  and XPath 2.0.


pkgId: 25cb45d99b2a8d539f10e8282b82fc9ea808b314
name: xorg-x11-fonts-base
arch: noarch
version: 7.1
epoch: 0
release: 2.1.el5
summary: Base fonts required by the X Window System.
url: http://www.x.org
rpm_license: Various licenses
rpm_vendor: Scientific Linux
rpm_group: User Interface/X
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xorg-x11-fonts-7.1-2.1.el5.src.rpm
location_href: xorg-x11-fonts-base-7.1-2.1.el5.noarch.rpm
checksum_type: sha
description:
  This package provides the base fonts, and font encoding files that are
  required by the X Window System.


pkgId: f09b2367d6c7f6263f52f6b93bbf704d18335c81
name: xorg-x11-fonts-misc
arch: noarch
version: 7.1
epoch: 0
release: 2.1.el5
summary: misc bitmap fonts for the X Window System
url: http://www.x.org
rpm_license: Various licenses
rpm_vendor: Scientific Linux
rpm_group: User Interface/X
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xorg-x11-fonts-7.1-2.1.el5.src.rpm
location_href: xorg-x11-fonts-misc-7.1-2.1.el5.noarch.rpm
checksum_type: sha
description:
  This package contains misc bitmap Chinese, Japanese, Korean, Indic, and Arabic
  fonts for use with X Window System.


pkgId: 7868930b8a771ffe0d0e1511adf2237bb1fc0047
name: xorg-x11-fonts-syriac
arch: noarch
version: 7.1
epoch: 0
release: 2.1.el5
summary: Syriac TrueType fonts by Beth Mardutho
url: http://www.x.org
rpm_license: Various licenses
rpm_vendor: Scientific Linux
rpm_group: User Interface/X
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xorg-x11-fonts-7.1-2.1.el5.src.rpm
location_href: xorg-x11-fonts-syriac-7.1-2.1.el5.noarch.rpm
checksum_type: sha
description:
  A collection of Syriac truetype fonts from Beth Mardutho, which are part
  of the core X Window System distribution.


pkgId: 52ae9757618ffbc8af7e7d2e5aa07b45644adb93
name: xorg-x11-server-Xdmx
arch: x86_64
version: 1.1.1
epoch: 0
release: 48.101.el5_10.3
summary: Distributed Multihead X Server and utilities
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X
rpm_buildhost: lxdist01
rpm_sourcerpm: xorg-x11-server-1.1.1-48.101.el5_10.3.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xorg-x11-server-Xdmx-1.1.1-48.101.el5_10.3.x86_64.rpm
checksum_type: sha
description:
  Xdmx is proxy X server that provides multi-head support for multiple displays
  attached to different machines (each of which is running a typical X server).
  When Xinerama is used with Xdmx, the multiple displays on multiple machines
  are presented to the user as a single unified screen.  A simple application
  for Xdmx would be to provide multi-head support using two desktop machines,
  each of which has a single display device attached to it.  A complex
  application for Xdmx would be to unify a 4 by 4 grid of 1280x1024 displays
  (each attached to one of 16 computers) into a unified 5120x4096 display.


pkgId: 169184130196f1757e45193a9f6c762268b33578
name: xorg-x11-server-Xephyr
arch: x86_64
version: 1.1.1
epoch: 0
release: 48.101.el5_10.3
summary: A nested server.
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X
rpm_buildhost: lxdist01
rpm_sourcerpm: xorg-x11-server-1.1.1-48.101.el5_10.3.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xorg-x11-server-Xephyr-1.1.1-48.101.el5_10.3.x86_64.rpm
checksum_type: sha
description:
  Xephyr is an X server, which has been implemented as an ordinary
  X application.  It runs in a window just like other X applications,
  but it is an X server itself in which you can run other software.  It
  is a very useful tool for developers who wish to test their
  applications without running them on their real X server.  Unlike
  Xnest, Xephyr renders to an X image rather than relaying the
  X protocol, and therefore supports the newer X extensions like
  Render and Composite.


pkgId: 9f4089d5926583c6aa9cb7a315dfa60653af21fa
name: xorg-x11-server-Xnest
arch: x86_64
version: 1.1.1
epoch: 0
release: 48.101.el5_10.3
summary: A nested server.
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X
rpm_buildhost: lxdist01
rpm_sourcerpm: xorg-x11-server-1.1.1-48.101.el5_10.3.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xorg-x11-server-Xnest-1.1.1-48.101.el5_10.3.x86_64.rpm
checksum_type: sha
description:
  Xnest is an X server, which has been implemented as an ordinary
  X application.  It runs in a window just like other X applications,
  but it is an X server itself in which you can run other software.  It
  is a very useful tool for developers who wish to test their
  applications without running them on their real X server.


pkgId: 5ab1d33e972235d85993d535af8104cbac0cc687
name: xorg-x11-server-Xorg
arch: x86_64
version: 1.1.1
epoch: 0
release: 48.101.el5_10.3
summary: Xorg X server
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X
rpm_buildhost: lxdist01
rpm_sourcerpm: xorg-x11-server-1.1.1-48.101.el5_10.3.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xorg-x11-server-Xorg-1.1.1-48.101.el5_10.3.x86_64.rpm
checksum_type: sha
description:
  X.org X11 is an open source implementation of the X Window System.  It
  provides the basic low level functionality which full fledged
  graphical user interfaces (GUIs) such as GNOME and KDE are designed
  upon.


pkgId: 48429a992030163449b1c950e983b942fd493c9c
name: xorg-x11-server-Xvfb
arch: x86_64
version: 1.1.1
epoch: 0
release: 48.101.el5_10.3
summary: A X Windows System virtual framebuffer X server.
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X
rpm_buildhost: lxdist01
rpm_sourcerpm: xorg-x11-server-1.1.1-48.101.el5_10.3.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xorg-x11-server-Xvfb-1.1.1-48.101.el5_10.3.x86_64.rpm
checksum_type: sha
description:
  Xvfb (X Virtual Frame Buffer) is an X server that is able to run on
  machines with no display hardware and no physical input devices.
  Xvfb simulates a dumb framebuffer using virtual memory.  Xvfb does
  not open any devices, but behaves otherwise as an X display.  Xvfb
  is normally used for testing servers.


pkgId: 371a62f465f024914deb678b928d5b66b094144f
name: xorg-x11-server-randr-source
arch: x86_64
version: 1.1.1
epoch: 0
release: 48.52.el5
summary: Source compatibility for RANDR 1.2 drivers
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xorg-x11-server-1.1.1-48.52.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xorg-x11-server-randr-source-1.1.1-48.52.el5.x86_64.rpm
checksum_type: sha
description:
  This package provides source compatibility for Xorg video drivers that
  rely on the new RANDR 1.2 modesetting infrastructure for output setup.
  Note that drivers so built do _not_ expose the RANDR 1.2 protocol in
  Red Hat Enterprise Linux 5.


pkgId: 509a3cfe29082771bc5ab940fba330d5f10f9190
name: xorg-x11-server-sdk
arch: x86_64
version: 1.1.1
epoch: 0
release: 48.101.el5_10.3
summary: SDK for X server driver module development
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: User Interface/X
rpm_buildhost: lxdist01
rpm_sourcerpm: xorg-x11-server-1.1.1-48.101.el5_10.3.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xorg-x11-server-sdk-1.1.1-48.101.el5_10.3.x86_64.rpm
checksum_type: sha
description:
  The SDK package provides the developmental files which are necessary for
  developing X server driver modules, and for compiling driver modules
  outside of the standard X11 source code tree.  Developers writing video
  drivers, input drivers, or other X modules should install this package.


pkgId: c70ea35c9f9ff9740184439bf3cc964de520c73a
name: xorg-x11-util-macros
arch: x86_64
version: 1.0.2
epoch: 0
release: 4.fc6
summary: X.Org X11 Autotools macros
url: http://www.x.org
rpm_license: The Open Group License
rpm_vendor: Scientific Linux
rpm_group: Development/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xorg-x11-util-macros-1.0.2-4.fc6.src.rpm
location_href: xorg-x11-util-macros-1.0.2-4.fc6.x86_64.rpm
checksum_type: sha
description:
  X.Org X11 autotools macros required for building the various packages that
  comprise the X Window System.


pkgId: 6b76885fa116bbdfc7b22997ef9fbb07a2d78127
name: xorg-x11-utils
arch: x86_64
version: 7.1
epoch: 0
release: 2.fc6
summary: X.Org X11 X client utilities
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux
rpm_group: User Interface/X
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xorg-x11-utils-7.1-2.fc6.src.rpm
location_href: xorg-x11-utils-7.1-2.fc6.x86_64.rpm
checksum_type: sha
description:
  A collection of client utilities which can be used to query the X server
  for various information, view and select fonts, etc.


pkgId: 42c6cbd230a1f3459c701ee267990f64f203a5dd
name: xorg-x11-xfwp
arch: x86_64
version: 1.0.1
epoch: 0
release: 3.1
summary: X.Org X11 X firewall proxy
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Scientific Linux
rpm_group: User Interface/X
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xorg-x11-xfwp-1.0.1-3.1.src.rpm
location_href: xorg-x11-xfwp-1.0.1-3.1.x86_64.rpm
checksum_type: sha
description:
  The X firewall proxy (xfwp) is an application layer gateway proxy that
  may be run on a network firewall host to forward X traffic  across  the
  firewall.


pkgId: 43b8281e8808b761a68df4ce4920c43aea27dd16
name: xrestop
arch: x86_64
version: 0.2
epoch: 0
release: 6.2.2
summary: X Resource Monitor
url: http://www.freedesktop.org/Software/xrestop
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Development/Tools
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xrestop-0.2-6.2.2.src.rpm
location_href: xrestop-0.2-6.2.2.x86_64.rpm
checksum_type: sha
description:
  A utility to monitor application usage of X resources in the X Server, and
  display them in a manner similar to 'top'.  This is a very useful utility
  for tracking down application X resource usage leaks.


pkgId: d09177140f5ff34c02773462ef05a6daca880ebe
name: xsane
arch: x86_64
version: 0.991
epoch: 0
release: 5.el5
summary: An X Window System front-end for the SANE scanner interface.
url: http://www.xsane.org/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Multimedia
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xsane-0.991-5.el5.src.rpm
location_href: xsane-0.991-5.el5.x86_64.rpm
checksum_type: sha
description:
  XSane is an X based interface for the SANE (Scanner Access Now Easy)
  library, which provides access to scanners, digital cameras, and other
  capture devices. XSane is written in GTK+ and provides control for
  performing the scan and then manipulating the captured image.


pkgId: 3538c6195d728f9459875856c094ba235b2f0ded
name: xsane-gimp
arch: x86_64
version: 0.991
epoch: 0
release: 5.el5
summary: A GIMP plug-in which provides the SANE scanner interface.
url: http://www.xsane.org/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/Multimedia
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xsane-0.991-5.el5.src.rpm
location_href: xsane-gimp-0.991-5.el5.x86_64.rpm
checksum_type: sha
description:
  This package provides the regular XSane frontend for the SANE scanner
  interface, but it works as a GIMP plug-in. You must have GIMP
  installed to use this package.


pkgId: 0cec987eaafa2167d3614313d197b6ac15acd703
name: xterm
arch: x86_64
version: 215
epoch: 0
release: 8.el5_4.1
summary: xterm terminal emulator for the X Window System
url: http://dickey.his.com/xterm
rpm_license: MIT
rpm_vendor: Scientific Linux
rpm_group: User Interface/X
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: xterm-215-8.el5_4.1.src.rpm
location_href: xterm-215-8.el5_4.1.x86_64.rpm
checksum_type: sha
description:
  The xterm program is a terminal emulator for the X Window System. It
  provides DEC VT102 and Tektronix 4014 compatible terminals for
  programs that can't use the window system directly.


pkgId: faeeda5a1bae151757928988542db8db399a8fa6
name: xulrunner
arch: i386
version: 17.0.10
epoch: 0
release: 1.el5_10
summary: XUL Runtime for Gecko Applications
url: http://developer.mozilla.org/En/XULRunner
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/Internet
rpm_buildhost: lxdist01
rpm_sourcerpm: xulrunner-17.0.10-1.el5_10.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xulrunner-17.0.10-1.el5_10.i386.rpm
checksum_type: sha
description:
  XULRunner is a Mozilla runtime package that can be used to bootstrap XUL+XPCOM
  applications that are as rich as Firefox and Thunderbird. It provides mechanisms
  for installing, upgrading, and uninstalling these applications. XULRunner also
  provides libxul, a solution which allows the embedding of Mozilla technologies
  in other projects and products.


pkgId: 6580efbfb7656606318fe1003b8101b78478b7bb
name: xulrunner-devel
arch: i386
version: 17.0.10
epoch: 0
release: 1.el5_10
summary: Development files for Gecko
url: http://developer.mozilla.org/En/XULRunner
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxdist01
rpm_sourcerpm: xulrunner-17.0.10-1.el5_10.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xulrunner-devel-17.0.10-1.el5_10.i386.rpm
checksum_type: sha
description:
  This package contains the libraries amd header files that are needed
  for writing XUL+XPCOM applications with Mozilla XULRunner and Gecko.




  AutoProv: 0


pkgId: 91235c4333871a1b38b14024689127012286f550
name: xz
arch: x86_64
version: 4.999.9
epoch: 0
release: 0.3.beta.20091007git.el5
summary: LZMA compression utilities
url: http://tukaani.org/xz/
rpm_license: LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/File
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xz-4.999.9-0.3.beta.20091007git.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xz-4.999.9-0.3.beta.20091007git.el5.x86_64.rpm
checksum_type: sha
description:
  XZ Utils are an attempt to make LZMA compression easy to use on free (as in
  freedom) operating systems. This is achieved by providing tools and libraries
  which are similar to use than the equivalents of the most popular existing
  compression algorithms.

  LZMA is a general purpose compression algorithm designed by Igor Pavlov as
  part of 7-Zip. It provides high compression ratio while keeping the
  decompression speed fast.


pkgId: a1520a52351950a970c3cfdf50a5d22d3492d089
name: xz-lzma-compat
arch: x86_64
version: 4.999.9
epoch: 0
release: 0.3.beta.20091007git.el5
summary: Older LZMA format compatibility binaries
url: http://tukaani.org/xz/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: xz-4.999.9-0.3.beta.20091007git.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: xz-lzma-compat-4.999.9-0.3.beta.20091007git.el5.x86_64.rpm
checksum_type: sha
description:
  The lzma-compat package contains compatibility links for older
  commands that deal with the older LZMA format.


pkgId: c2bd1b44ffd4dd4502c9a489584954bc30fd76cd
name: yelp
arch: x86_64
version: 2.16.0
epoch: 0
release: 30.el5_9
summary: A system documentation reader from the Gnome project
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Applications/System
rpm_buildhost: lxdist03
rpm_sourcerpm: yelp-2.16.0-30.el5_9.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yelp-2.16.0-30.el5_9.x86_64.rpm
checksum_type: sha
description:
  Yelp is the Gnome 2 help/documentation browser. It is designed
  to help you browse all the documentation on your system in
  one central tool.


pkgId: 39376913597f45c7d5a78082dfacd4bf934e7f3d
name: yp-tools
arch: x86_64
version: 2.9
epoch: 0
release: 2.el5
summary: NIS (or YP) client programs.
url: http://www.linux-nis.org/nis/yp-tools/index.html
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yp-tools-2.9-2.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yp-tools-2.9-2.el5.x86_64.rpm
checksum_type: sha
description:
  The Network Information Service (NIS) is a system which provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network.  NIS can enable
  users to login on any machine on the network, as long as the machine
  has the NIS client programs running and the user's password is
  recorded in the NIS passwd database.  NIS was formerly known as Sun
  Yellow Pages (YP).

  This package's NIS implementation is based on FreeBSD's YP and is a
  special port for glibc 2.x and libc versions 5.4.21 and later.  This
  package only provides the NIS client programs.  In order to use the
  clients, you'll need to already have an NIS server running on your
  network. An NIS server is provided in the ypserv package.

  Install the yp-tools package if you need NIS client programs for machines
  on your network.  You will also need to install the ypbind package on
  every machine running NIS client programs.  If you need an NIS server,
  you'll need to install the ypserv package on one machine on the network.


pkgId: 445f2f345e9e7bb2cc58ea9a81d57229af89fcaf
name: ypbind
arch: x86_64
version: 1.19
epoch: 3
release: 12.el5_6.1
summary: The NIS daemon which binds NIS clients to an NIS domain.
url: http://www.linux-nis.org/nis/ypbind-mt/index.html
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: System Environment/Daemons
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: ypbind-1.19-12.el5_6.1.src.rpm
location_href: ypbind-1.19-12.el5_6.1.x86_64.rpm
checksum_type: sha
description:
  The Network Information Service (NIS) is a system that provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network. NIS can allow users
  to log in on any machine on the network, as long as the machine has
  the NIS client programs running and the user's password is recorded in
  the NIS passwd database. NIS was formerly known as Sun Yellow Pages
  (YP).

  This package provides the ypbind daemon. The ypbind daemon binds NIS
  clients to an NIS domain. Ypbind must be running on any machines
  running NIS client programs.

  Install the ypbind package on any machines running NIS client programs
  (included in the yp-tools package). If you need an NIS server, you
  also need to install the ypserv package to a machine on your network.


pkgId: 9c6ec081bd7f35d720beea314768731dc72b5bda
name: ypserv
arch: x86_64
version: 2.19
epoch: 0
release: 10.el5_9.1
summary: The NIS (Network Information Service) server.
url: http://www.linux-nis.org/nis/ypserv/index.html
rpm_license: GPL
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Daemons
rpm_buildhost: lxdist01
rpm_sourcerpm: ypserv-2.19-10.el5_9.1.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: ypserv-2.19-10.el5_9.1.x86_64.rpm
checksum_type: sha
description:
  The Network Information Service (NIS) is a system that provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network. NIS can allow users
  to log in on any machine on the network, as long as the machine has
  the NIS client programs running and the user's password is recorded in
  the NIS passwd database. NIS was formerly known as Sun Yellow Pages
  (YP).

  This package provides the NIS server, which will need to be running on
  your network. NIS clients do not need to be running the server.

  Install ypserv if you need an NIS server for your network. You also
  need to install the yp-tools and ypbind packages on any NIS client
  machines.


pkgId: 8762d7631fdf31334fed47210d026cb9f260572a
name: yum
arch: noarch
version: 3.2.22
epoch: 0
release: 41.slc5
summary: RPM installer/updater
url: http://yum.baseurl.org/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxdist03
rpm_sourcerpm: yum-3.2.22-41.slc5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-3.2.22-41.slc5.noarch.rpm
checksum_type: sha
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically prompting the user as necessary.


pkgId: 735e93c6bb99eb63075c2efedadb5439c5371d76
name: yum-NetworkManager-dispatcher
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: NetworkManager dispatcher plugin to help yum, when changing networks
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-NetworkManager-dispatcher-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin forces yum to check it's cache if/when a new network connection
  happens in NetworkManager. Note that currently there is no checking of
  previous data, so if your WiFi keeps going up and down (or you suspend/resume
  a lot) yum will recheck it's cached data a lot.


pkgId: e994af818b8aca11d426133cce24ef3da1b89549
name: yum-allowdowngrade
arch: noarch
version: 1.1.16
epoch: 0
release: 13.slc5
summary: Yum plugin to enable manual downgrading of packages
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: yum-utils-1.1.16-13.slc5.src.rpm
location_href: yum-allowdowngrade-1.1.16-13.slc5.noarch.rpm
checksum_type: sha
description:
  This plugin adds a --allow-downgrade flag to yum to make it possible to
  manually downgrade packages to specific versions.


pkgId: 5d1ea9e2c84c359775e82863fbe991560a09c3ff
name: yum-autoupdate
arch: noarch
version: 4.3.1
epoch: 6
release: 1.slc5
summary: yum autoupdate setup for Scientific Linux CERN
url: http://cern.ch/linux/
rpm_license: GPL
rpm_vendor: CERN
rpm_group: Applications/System
rpm_buildhost: lxdist01
rpm_sourcerpm: yum-autoupdate-4.3.1-1.slc5.src.rpm
rpm_packager: Linux.Support@cern.ch
location_href: yum-autoupdate-4.3.1-1.slc5.noarch.rpm
checksum_type: sha
description:
  The yum-autoupdate  package contains Scientific Linux CERN setup for
  automatic system updates using yum.


pkgId: f819818ead60df19c68c6cb560b21b4fadce471c
name: yum-changelog
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin for viewing package changelogs before/after updating
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-changelog-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin adds a command line option to allow viewing package changelog
  deltas before or after updating packages.


pkgId: 5b9af21510465478146a0103b0fea6edc3948557
name: yum-downloadonly
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to add downloadonly command option
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-downloadonly-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin adds a --downloadonly flag to yum so that yum will only download
  the packages and not install/update them.


pkgId: 17565026fed1f82435d38f8265e946b927b56b25
name: yum-filter-data
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to list filter based on package data
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-filter-data-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin adds the options --filter- vendors, groups, packagers, licenses,
  arches, committers, buildhosts, baseurls, package-sizes, archive-sizes and
  installed-sizes. Note that each package must match at least one pattern/range in
  each category, if any were specified.


pkgId: 442a285c4652349c5493cf93b1d25dbfa8012bce
name: yum-firstboot
arch: noarch
version: 4.3.1
epoch: 6
release: 1.slc5
summary: Firstboot hook for yum-autoupdate
url: http://cern.ch/linux/
rpm_license: GPL
rpm_vendor: CERN
rpm_group: Applications/System
rpm_buildhost: lxdist01
rpm_sourcerpm: yum-autoupdate-4.3.1-1.slc5.src.rpm
rpm_packager: Linux.Support@cern.ch
location_href: yum-firstboot-4.3.1-1.slc5.noarch.rpm
checksum_type: sha
description:
  (NOT IMPLEMENTED YET)
  This package provides firstboot setup for yum-autoupdate
  (NOT IMPLEMENTED YET)


pkgId: ebdf22b6ca79c5820e8a9baae665d0296d6eef89
name: yum-keys
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to deal with signing keys
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-keys-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin adds the commands keys, keys-info, keys-data and keys-remove. They
  allow you to query and remove signing keys.


pkgId: 84b9228bd57efd7861b346c609b1e13dc7e9b691
name: yum-kmod
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to handle fedora kernel modules.
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-kmod-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  Plugin for Yum to handle installation of kmod-foo type of kernel modules,
  when new kernel versions are installed.


pkgId: 4d152ce20b22d71dded5626a682417812392a37b
name: yum-list-data
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to list aggregate package data
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-list-data-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin adds the commands list- vendors, groups, packagers, licenses,
  arches, committers, buildhosts, baseurls, package-sizes, archive-sizes and
  installed-sizes.


pkgId: 2f826bf9a6adb3c1676ee8e15e1ce6f6a1c5c0b3
name: yum-merge-conf
arch: noarch
version: 1.1.16
epoch: 0
release: 13.slc5
summary: Yum plugin to merge configuration changes when installing packages
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: yum-utils-1.1.16-13.slc5.src.rpm
location_href: yum-merge-conf-1.1.16-13.slc5.noarch.rpm
checksum_type: sha
description:
  This yum plugin adds the "--merge-conf" command line option. With this option,
  Yum will ask you what to do with config files which have changed on updating a
  package.


pkgId: dbbb019720066583a12dd4c9c8b31ad1d46f1946
name: yum-priorities
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: plugin to give priorities to packages from different repos
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-priorities-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin allows repositories to have different priorities.
  Packages in a repository with a lower priority can't be overridden by packages
  from a repository with a higher priority even if repo has a later version.


pkgId: 56f2a94678ae5c9eea0eab91430336edbffbe278
name: yum-protect-packages
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to prevents Yum from removing itself and other protected packages
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-protect-packages-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  this plugin prevents Yum from removing itself and other protected packages.
  By default, yum is the only package protected, but by extension this
  automatically protects everything on which yum depends (rpm, python, glibc,
  and so on).Therefore, the plugin functions well even without
  compiling careful lists of all important packages.


pkgId: ec7f07e62f8aa39d2a3486bb5de2bbd1430ed201
name: yum-protectbase
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to protect packages from certain repositories.
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-protectbase-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin allows certain repositories to be protected. Packages in the
  protected repositories can't be overridden by packages in non-protected
  repositories even if the non-protected repo has a later version.


pkgId: 263c00ddb911eac3e134d9b45874c28e8112bd89
name: yum-refresh-updatesd
arch: noarch
version: 1.1.16
epoch: 0
release: 13.slc5
summary: Tell yum-updatesd to check for updates when yum exits
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: yum-utils-1.1.16-13.slc5.src.rpm
location_href: yum-refresh-updatesd-1.1.16-13.slc5.noarch.rpm
checksum_type: sha
description:
  yum-refresh-updatesd tells yum-updatesd to check for updates when yum exits.
  This way, if you run 'yum update' and install all available updates, puplet
  will almost instantly update itself to reflect this.


pkgId: 25dc1172a07b659b870450839ef520bc78aabfbf
name: yum-security
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to enable security filters
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-security-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin adds the options --security, --cve, --bz and --advisory flags
  to yum and the list-security and info-security commands.
  The options make it possible to limit list/upgrade of packages to specific
  security relevant ones. The commands give you the security information.


pkgId: 968690e82747bff8dd2f13e22b1a74c53a4804ef
name: yum-tmprepo
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to add temporary repositories
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-tmprepo-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin adds the option --tmprepo which takes a url to a .repo file
  downloads it and enables it for a single run. This plugin tries to ensure
  that temporary repositories are safe to use, by default, by not allowing
  gpg checking to be disabled.


pkgId: 621342d7cf3cf5ba48f6ec3755f042a284a8905e
name: yum-updateonboot
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Run yum update on system boot
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-updateonboot-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  Runs yum update on system boot. This allows machines that have been turned
  off for an extended amount of time to become secure immediately, instead of
  waiting until the next early morning cron job.


pkgId: eaab9a53cd999ba05306e862c197173a975676bb
name: yum-updatesd
arch: noarch
version: 0.9
epoch: 1
release: 6.el5_10
summary: Update notification daemon
url: http://linux.duke.edu/yum/
rpm_license: GPLv2
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxdist01
rpm_sourcerpm: yum-updatesd-0.9-6.el5_10.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-updatesd-0.9-6.el5_10.noarch.rpm
checksum_type: sha
description:
  yum-updatesd provides a daemon which checks for available updates and
  can notify you when they are available via email, syslog or dbus.


pkgId: ae30487d83cbd59cac9077b99bc4df050ec3387a
name: yum-upgrade-helper
arch: noarch
version: 1.1.16
epoch: 0
release: 13.slc5
summary: Yum plugin to help upgrades to the next distribution version
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_group: System Environment/Base
rpm_buildhost: lxslc5-amd64.cern.ch
rpm_sourcerpm: yum-utils-1.1.16-13.slc5.src.rpm
location_href: yum-upgrade-helper-1.1.16-13.slc5.noarch.rpm
checksum_type: sha
description:
  this plugin allows yum to erase specific packages on install/update based on an additional
  metadata file in repositories. It is used to simplify distribution upgrade hangups.


pkgId: db9a93561ac7741b6eb1c9792f2f3eb873b92d1e
name: yum-utils
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Utilities based around the yum package manager
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Tools
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-utils-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  yum-utils is a collection of utilities and examples for the yum package
  manager. It includes utilities by different authors that make yum easier and
  more powerful to use. These tools include: debuginfo-install, package-cleanup,
  repoclosure, repodiff, repo-graph, repomanage, repoquery, repo-rss, reposync,
  repotrack, verifytree, yum-builddep, yum-complete-transaction, yumdownloader,
  yum-debug-dump and yum-groups-manager.


pkgId: 874e8df10440cc69f17bf24b48159354423ab9e9
name: yum-verify
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to add verify command, and options
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-verify-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin adds the commands verify, verify-all and verify-rpm. There are
  also a couple of options. This command works like rpm -V, to verify your
  installation.


pkgId: f20be852ebc80709d002b17fa78f20aa108c9de7
name: yum-versionlock
arch: noarch
version: 1.1.16
epoch: 0
release: 21.el5
summary: Yum plugin to lock specified packages from being updated
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Base
rpm_buildhost: lxbslc6-amd64
rpm_sourcerpm: yum-utils-1.1.16-21.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: yum-versionlock-1.1.16-21.el5.noarch.rpm
checksum_type: sha
description:
  This plugin takes a set of name/versions for packages and excludes all other
  versions of those packages (including optionally following obsoletes). This
  allows you to protect packages from being updated by newer versions,
  for example.


pkgId: 490ed2c71fc739183d3dbdbc8eac4c899513a87a
name: zenity
arch: x86_64
version: 2.16.0
epoch: 0
release: 2.el5
summary: Display dialog boxes from shell scripts
url: http://directory.fsf.org/zenity.html
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: zenity-2.16.0-2.el5.src.rpm
location_href: zenity-2.16.0-2.el5.x86_64.rpm
checksum_type: sha
description:
  Zenity lets you display Gtk+ dialog boxes from the command line and through
  shell scripts. It is similar to gdialog, but is intended to be saner. It comes
  from the same family as dialog, Xdialog, and cdialog.


pkgId: 0f3eaa6d517c41dbe15b9ccca751abc42dc94779
name: zip
arch: x86_64
version: 2.31
epoch: 0
release: 2.el5
summary: A file compression and packaging utility compatible with PKZIP.
url: http://www.info-zip.org/pub/infozip/Zip.html
rpm_license: distributable
rpm_vendor: Scientific Linux
rpm_group: Applications/Archiving
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: zip-2.31-2.el5.src.rpm
location_href: zip-2.31-2.el5.x86_64.rpm
checksum_type: sha
description:
  The zip program is a compression and file packaging utility.  Zip is
  analogous to a combination of the UNIX tar and compress commands and
  is compatible with PKZIP (a compression and file packaging utility for
  MS-DOS systems).

  Install the zip package if you need to compress files using the zip
  program.


pkgId: 839b4e9d16eda805835bf56041de6272f98fcb1d
name: zisofs-tools
arch: x86_64
version: 1.0.6
epoch: 0
release: 3.2.2
summary: Utilities for creating compressed CD-ROM filesystems.
url: http://www.kernel.org/pub/linux/utils/fs/zisofs/
rpm_license: GPL
rpm_vendor: Scientific Linux
rpm_group: Applications/System
rpm_buildhost: norob.fnal.gov
rpm_sourcerpm: zisofs-tools-1.0.6-3.2.2.src.rpm
location_href: zisofs-tools-1.0.6-3.2.2.x86_64.rpm
checksum_type: sha
description:
  A utility which works in combination with an appropriately patched
  version of mkisofs to allow the creation of compressed CD-ROM
  filesystems.


pkgId: d7a2691073cfb6f15f5565a72bc93d1674062956
name: zlib
arch: i386
version: 1.2.3
epoch: 0
release: 7.el5
summary: The zlib compression and decompression library.
url: http://www.gzip.org/zlib/
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Libraries
rpm_buildhost: lxbslc6-i386
rpm_sourcerpm: zlib-1.2.3-7.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: zlib-1.2.3-7.el5.i386.rpm
checksum_type: sha
description:
  Zlib is a general-purpose, patent-free, lossless data compression
  library which is used by many different programs.


pkgId: 51baba5f8cece59caf6cd208ebd8e2e3260e8495
name: zlib-devel
arch: i386
version: 1.2.3
epoch: 0
release: 7.el5
summary: Header files and libraries for Zlib development.
url: http://www.gzip.org/zlib/
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: Development/Libraries
rpm_buildhost: lxbslc6-i386
rpm_sourcerpm: zlib-1.2.3-7.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: zlib-devel-1.2.3-7.el5.i386.rpm
checksum_type: sha
description:
  The zlib-devel package contains the header files and libraries needed
  to develop programs that use the zlib compression and decompression
  library.


pkgId: 78d9d294ec8c83bd162105b6e82fe4c185bf237b
name: zsh
arch: x86_64
version: 4.2.6
epoch: 0
release: 9.el5
summary: A powerful interactive shell
url: http://zsh.sunsite.dk/
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Shells
rpm_buildhost: lxdist02
rpm_sourcerpm: zsh-4.2.6-9.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: zsh-4.2.6-9.el5.x86_64.rpm
checksum_type: sha
description:
  The zsh shell is a command interpreter usable as an interactive login
  shell and as a shell script command processor.  Zsh resembles the ksh
  shell (the Korn shell), but includes many enhancements.  Zsh supports
  command line editing, built-in spelling correction, programmable
  command completion, shell functions (with autoloading), a history
  mechanism, and more.


pkgId: 9a46a427efb6936435477d63293f5cbc5fcc0c43
name: zsh-html
arch: x86_64
version: 4.2.6
epoch: 0
release: 9.el5
summary: Zsh shell manual in html format
url: http://zsh.sunsite.dk/
rpm_license: BSD
rpm_vendor: Scientific Linux CERN, http://cern.ch/linux
rpm_group: System Environment/Shells
rpm_buildhost: lxdist02
rpm_sourcerpm: zsh-4.2.6-9.el5.src.rpm
rpm_packager: CERN Linux Support <linux.support@cern.ch>
location_href: zsh-html-4.2.6-9.el5.x86_64.rpm
checksum_type: sha
description:
  The zsh shell is a command interpreter usable as an interactive login
  shell and as a shell script command processor.  Zsh resembles the ksh
  shell (the Korn shell), but includes many enhancements.  Zsh supports
  command line editing, built-in spelling correction, programmable
  command completion, shell functions (with autoloading), a history
  mechanism, and more.

  This package contains the Zsh manual in html format.


