Wed Apr 18 09:27:12 UTC 2007  Johnny Willemsen  <jwillemsen@remedy.nl>

        * config/qt.mpb:
          Added custom QRC. Thanks to Roland Sun <rolandsun at gmail dot com>
          for delivering the patch. This is part of bugzilla 2870

Mon Apr 16 15:00:49 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/MakeProjectCreator.pm:
        * modules/ProjectCreator.pm:
        * templates/make.mpd:
        * templates/makedll.mpt:

          Added support for using gcj with the 'java' language type.

Thu Apr  5 19:09:47 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/Creator.pm:

          Fixed a bug where $() vars that appeared after other $() vars
          would not be expanded with template values.

          Also, added a performance enhancement when replacing $() vars.

Thu Mar 29 13:40:30 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/Creator.pm:

          Fixed a bug where $() vars would not be expanded with template
          values if no relative replacement values were supplied (either
          implicitly through default.rel or explicitly through -relative).

Mon Mar 26 16:22:00 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/WorkspaceCreator.pm:

          Added additional code to detect circular dependencies.  Without
          this, there are situations where MPC will go into an infinite
          loop.

        * templates/nmake.mpd:

          Change to look for the dependency generator in MPC_ROOT first and
          then the other places.  Also modified the message to point the
          user to MPC instead of svn for a dependency generator.

Thu Mar 22 17:48:27 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/WorkspaceCreator.pm:

          Fixed a bug where using the -name_modifier would end up causing
          the workspace file names to contain previous workspace names.

Thu Mar 22 14:36:53 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * depgen.pl:
        * modules/Depgen/DependencyEditor.pm:
        * modules/Depgen/DependencyGenerator.pm:
        * modules/Depgen/DependencyWriter.pm:
        * modules/Depgen/DependencyWriterFactory.pm:
        * modules/Depgen/Driver.pm:
        * modules/Depgen/MakeDependencyWriter.pm:
        * modules/Depgen/MakeObjectGenerator.pm:
        * modules/Depgen/NMakeDependencyWriter.pm:
        * modules/Depgen/NMakeObjectGenerator.pm:
        * modules/Depgen/ObjectGenerator.pm:
        * modules/Depgen/ObjectGeneratorFactory.pm:
        * modules/Depgen/Preprocessor.pm:

          Brought over my dependency generator from ACE.  The core of this
          dependency generator will be used by the ACE specific version
          (just like the core of MPC).

        * modules/Driver.pm:

          Don't perform relative replacement for  MPC_ROOT ever.

        * templates/make.mpd:

          Use the new dependency generator instead of makedepend.

Wed Mar 21 16:54:06 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * docs/README:

          Document the way multiple feature names work in feature projects.

        * templates/make.mpd:
        * templates/makedll.mpt:

          Support multiple configurations within a single makefile.

Thu Mar 15 13:25:09 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/DirectoryManager.pm:
        * modules/WorkspaceCreator.pm:

          Fixed a bug where a full path to a mpc file specified in an
          aggregated workspace would not be handled properly.  Thanks to
          Sumant Tambe <sutambe at dre dot vanderbilt dot edu> for reporting
          this.

        * modules/VC71WorkspaceCreator.pm:

          Reverted my change from Wed Mar 14 19:20:48 UTC 2007.  It turns
          out that is wasn't necessary and didn't benefit anyone.

Wed Mar 14 19:20:48 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/ProjectCreator.pm:

          When setting the 'static_libs_only' feature, use zero if
          get_static() returns undef.

        * modules/VC71WorkspaceCreator.pm:

          Added a ProjectSection for WebsiteProperties that is desired by
          Visual Studio 2005 SP1.  It does not negatively affect Visual
          Studio 2003 or Visual Studio 2005 (without SP1).

Mon Mar 13 00:22:33 UTC 2007  Ossama Othman  <ossama_othman at symantec dot com>

        From Russell Mora
        * templates/nmake.mpd:
        * templates/nmakedll.mpt:
        * templates/nmakeexe.mpt:

          This option use to be /GX which is now equivalent to /EHsc:

          /GR[-] enable C++ RTTI           /GX[-] enable C++ EH (same as /EHsc)
          /EHs enable C++ EH (no SEH exc)  /EHa enable C++ EH (w/ SEH exc)
          /EHc extern "C" defaults to nothrow

          Mon Jul 11 13:26:52 2005  Chad Elliott  <elliott_c@ociweb.com>

                * templates/nmakedll.mpt:
                * templates/nmakeexe.mpt:

                  Switch from /GX to /EHs (which is supported by vc6) to
                  avoid build warnings using the Visual Studio 8 compiler
                  with nmake.

          I don't see why it was changed to /EHs as opposed to /EHsc so
          changing it to what appears to be correct.

Fri Mar  9 13:43:25 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/ProjectCreator.pm:

          Set the 'static_libs_only' feature based on whether or not the
          -static option is used.

Thu Mar 08 19:55:44 2007  Steve Huston  <shuston@riverace.com>

        * templates/vc8dll.mpt:
        * templates/vc8exe.mpt:
        * templates/vc8lib.mpt:
        * templates/vc8libexe.mpt: Replace _CRT_SECURE_NO_DEPRECATE with
          _CRT_NONSTDC_NO_WARNINGS. We shouldn't defeat the security-related
          warnings by default, but the _CRT_NONSTDC_NO_WARNINGS are for name
          changes only (generally a prefixed _) and have no affect on
          function.

Mon Mar  5 13:31:24 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * docs/templates/vc8java.txt:

          Added documentation for the vc8java template.

        * modules/WorkspaceCreator.pm:

          Fixed a bug where relative paths would come back in "windows"
          style when generating projects for a windows based project type.
          All file names need to be in the UNIX style for workspaces.

Fri Mar  2 18:14:56 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * docs/USAGE:
        * modules/Driver.pm:
        * modules/MakeWorkspaceBase.pm:
        * modules/Options.pm:
        * modules/ProjectCreator.pm:
        * modules/WorkspaceCreator.pm:

          Added a new option, -for_eclipse, which is useful only to make
          based project types.  It creates files at the top level that
          indicate a project to Eclipse.  It is used by importing an
          existing project into the workspace.

Fri Mar  2 15:57:34 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/Creator.pm:

          Fixed a bug in subtraction where if the element to be subtracted
          is the first element it would not be removed.

Wed Feb 28 13:50:41 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/AutomakeWorkspaceCreator.pm:

          Since the top-level Makefile is always added to
          configure.ac.Makefiles, we need to mark '.' as beeing seen so that
          ./Makefile is not added too.

        * modules/Options.pm:

          Recognize -help so that an error is not printed, but the usage
          still is.

        * modules/WorkspaceCreator.pm:

          Ignore option errors with no message (in case -help is used on the
          command line within a workspace).

Tue Feb 27 15:17:35 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * devtools/document_template.pl:

          Modified this script to look one directory up from the templates
          directory for docs/templates to find documentation for templates
          that do not reside in the MPC tree.

Tue Feb 27 13:33:42 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/Creator.pm:

          Avoid an infinite loop when processing -value_template foo=$(FOO).
          Thanks to Steve Huston for reporting this.

Mon Feb 26 17:30:03 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/BDS4WorkspaceCreator.pm:
        * modules/BMakeWorkspaceCreator.pm:
        * modules/CCWorkspaceCreator.pm:
        * modules/NMakeWorkspaceCreator.pm:
        * modules/VC6WorkspaceCreator.pm:
        * modules/VC7WorkspaceCreator.pm:
        * modules/WinWorkspaceBase.pm:

          Added a Windows Workspace base module to override methods that are
          used in Creator::expand_variables().

        * modules/Options.pm:

          Reverted my change from Wed Jan 24 19:04:58 UTC 2007.  It turns
          out that the "extra parameter" was still needed.

        * modules/ProjectCreator.pm:

          Corrected a comment about sorting template variable values.

Mon Feb 26 13:09:44 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * docs/README:

          Moved the Modify_Custom section down to the end of the
          Define_Custom section.

        * modules/Creator.pm:

          Fixed a bug in subtraction where a partial subtraction would occur
          if an element contained the subtracted element plus other text.

        * prj_install.pl:

          Added the -l option to use symbolic links instead of copies.

Fri Feb 16 19:56:13 UTC 2007  Johnny Willemsen  <jwillemsen@remedy.nl>

        * config/openssl.mpb:
          Added support for borland template so that we can use the
          borland template with openssl

Mon Feb 12 13:33:13 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * docs/README:
        * modules/ProjectCreator.pm:
        * templates/nmake.mpd:
        * templates/vc7.mpd:
        * templates/vc8.mpd:

          Changed the source component specific keyword, managed, to be
          allowed as a project level setting as well.  Also, the value of the
          'managed' setting can determine different managed c++ levels for
          vc8 only.

Thu Feb  8 19:45:54 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * config/global.features:

          By default, disable the ziparchive feature.

        * docs/README:
        * modules/ProjectCreator.pm:
        * templates/nmake.mpd:
        * templates/vc7.mpd:
        * templates/vc8.mpd:

          Added a new source component specific keyword, managed, which
          indicates that the source files within the scope of this setting
          are to be treated as Managed C++ (a Microsoft extension).

        * docs/templates/vc8.txt:
        * modules/VC8WorkspaceCreator.pm:

          If the 'add_references' template variable is set, the vc8 C++
          projects will have project references inserted into them based on
          the 'after' keyword setting.

Fri Feb  2 17:47:09 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * config/swig_php.mpb:

          Added /. after $(PHP_INCLUDE) in the includes setting.  In case
          the PHP_INCLUDE environment variable is not set, something is
          still passed to the -I option.

        * config/ziparchive.mpb:

          Added /. after $(ZIPARCHIVEROOT) in the includes setting.  In case
          the ZIPARCHIVEROOT environment variable is not set, something is
          still passed to the -I option.

          And switched to lit_libs.

        * config/zzip.mpb:

          For non-Windows based project types, use lit_libs instead of libs.

        * docs/templates/automake.txt:

          Documented the automake template variables.

        * docs/templates/common.txt:

          Added the definition of the forcount template variable.

        * modules/AutomakeProjectCreator.pm:
        * templates/automake.mpd:

          Replaced the am_includes template variable with the includes
          project variable.  In the past, these were different but now they
          are exactly the same.

Thu Feb  1 18:29:19 UTC 2007  James H. Hill  <hillj@isis.vanderbilt.edu>

        * docs/templates/vc7.txt:
        * docs/templates/vc8.txt:
        * templates/vc7.mpd:
        * templates/vc8.mpd:

          Added new template variable midl_notlb to suppress the
          creation of type libraries.

Wed Jan 24 19:04:58 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/CCWorkspaceCreator.pm:

          Fixed a bug in the dependency code that would make the wrong
          directory when the -into option was used.

        * modules/ConfigParser.pm:

          Provide diagnostic information when an environment variable is
          used in the configuration file, but is not defined by the user.

        * modules/Driver.pm:

          Keep one more directory level when printing out the configuration
          file.

        * modules/Options.pm:

          Removed an extra parameter when setting the template variable
          overrides.  It was no longer necessary due to my change from Fri
          Jan 12 15:24:27 UTC 2007.

        * modules/ProjectCreator.pm:
        * modules/TemplateParser.pm:

          Fixed a bug where a scoped assignment would make the original
          assignment disappear completely.  The original assignment needs to
          be maintained so that when the assignment is used outside of a
          scope it has the value specified by the user.

        * modules/VC8WorkspaceCreator.pm:
        * modules/WorkspaceCreator.pm:
        * templates/vc8csharp.mpd:
        * templates/vc8java.mpd:
        * templates/vc8vb.mpd:

          Provide project references based on the 'after' keyword setting
          for c#, vb and java projects only.

        * registry.pl:

          Added commands to process .mpc files.

        * templates/cc.mpd:

          Only output the dependency tag if the 'after' keyword has been
          set.

        * templates/make.mpd:
        * templates/makedll.mpt:

          Changed the way that output directories are made.  The targets no
          longer depend on the output directory, they are made on the fly.

Fri Jan 19 15:34:17 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/TemplateParser.pm:

          Fixed a bug where the foreach variable names were not processed
          correctly if they were mixed case.

Thu Jan 18 19:57:42 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/TemplateParser.pm:

          Provide a new tmeplate function, remove_from, that will find a
          particular name in any of the valid component sets (e.g.,
          source_files, header_files, etc.) and remove it from the list.
          This is used in the change below.

        * templates/vc8csharp.mpd:

          If a source file is of the 'subtype' Form or Component, there may
          be corresponding .Designer.cs and .resx files that are dependent
          upon the source file.  If this is the case, the .Designer.cs and
          .resx files will automatically be marked as dependent upon the
          originating source file.  In order for this to happen though, the
          .Designer.cs and .resx files must be in the MPC project either
          implicitly or explicitly.

Thu Jan 18 16:44:51 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/Creator.pm:

          Fixed a bug when subtracting a value, the value was escaped for
          use as a regular expression before calling subtraction_core().  It
          should only happen inside of Creator::subtraction_core().

        * templates/vc8.mpd:

          The DisableSpecificWarnings template variable value should be
          semi-colon separated.  I'm sure others that will need to change in
          this same way.

Thu Jan 18 14:24:07 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * config/swig_perl.mpb:

          Added a specific section for Windows based project types to add
          $(PERL5_LIB) to lit_libs.

        * modules/ProjectCreator.pm:

          Fixed a bug where output extensions of custom definitions that
          contain text before the extension (e.g, _i.cpp) would cause files
          to be skipped instead of automatically added.

        * modules/TemplateParser.pm:

          When splitting parameters, make sure that we match the regular
          expression at the beginning of the line.

Fri Jan 12 18:24:26 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * templates/vc8csharp.mpd:

          Modified the template to use the basename of LastGenOutput and
          DependentUpon settings.  Also, when a .settings file is listed as
          a resx file it will have the SettingsSingleFileGenerator instead
          of the ResXFileCodeGenerator when the generates_source template
          variable is set.

Fri Jan 12 15:24:27 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/Creator.pm:
        * modules/ProjectCreator.pm:

          Fixed a bug where mixing project variables and scoped project
          variables would result in only the values set as scoped project
          variables being used.

Thu Jan 11 19:19:55 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * config/swig_php.mpb:
        * config/swig_python.mpb:
        * config/swig_ruby.mpb:
        * config/swig_tcl.mpb:

          Added SWIG base projects for php, python, ruby, and tcl.

        * generate_export_header.pl:

          Simplified code to determine the output file name.

        * modules/ProjectCreator.pm:

          Fixed a bug where when the -ti option is used within a workspace,
          subsequent uses of -ti are ignored.

Mon Jan  8 13:39:23 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/AutomakeWorkspaceCreator.pm:

          During post processing, remove any duplicate targets.  Duplicate
          targets show up as build warnings from automake.

Fri Jan 05 19:06:52 2007  Steve Huston  <shuston@riverace.com>

        * templates/vc7dll.mpt:
        * templates/vc7exe.mpt:
        * templates/vc7lib.mpt:
        * templates/vc7libexe.mpt: Added Pharlap ETS configuration sections
          to allow generation of Pharlap ETS configurations with VC7.1.
          Thank you to David Hauck for contributing these changes.

Thu Jan  4 16:08:51 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * devtools/document_template.pl:

          Changed the table style for the html output.

        * docs/templates/vc7.txt:

          Added the output_subdir definition.

        * docs/templates/vc8.txt:

          Began documenting the vc8 template.

        * docs/MPC.sgml:
        * docs/USAGE:
        * modules/AutomakeWorkspaceCreator.pm:
        * modules/BDS4WorkspaceCreator.pm:
        * modules/Driver.pm:
        * modules/EM3WorkspaceCreator.pm:
        * modules/HTMLWorkspaceCreator.pm:
        * modules/MakeWorkspaceBase.pm:
        * modules/Options.pm:
        * modules/ProjectCreator.pm:
        * modules/VC6WorkspaceCreator.pm:
        * modules/VC71WorkspaceCreator.pm:
        * modules/VC7WorkspaceCreator.pm:
        * modules/VC8WorkspaceCreator.pm:
        * modules/WorkspaceCreator.pm:

          Added an option, -nocomments, which causes MPC to generate
          workspaces without comments at the top.

Tue Jan  2 20:07:32 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * modules/ProjectCreator.pm:

          Fixed a bug where exclusion of more than one file would result in
          only the last file listed being excluded.

Tue Jan  2 18:05:52 UTC 2007  Chad Elliott  <elliott_c@ociweb.com>

        * config/zzip.mpb:

          Since zzip requires zlib, inherit from the zlib base project and
          and have requires += zlib.

        * modules/Driver.pm:

          Simplified determination of workspace or project creators.

        * modules/VC7ProjectCreator.pm:
        * modules/VC7WorkspaceCreator.pm:
        * modules/VC8ProjectCreator.pm:
        * templates/vc7java.mpd:
        * templates/vc7java.mpt:
        * templates/vc8java.mpd:
        * templates/vc8java.mpt:

          Added java support for vc7, vc71 and vc8.

Wed Dec 20 13:02:13 2006  Johnny Willemsen  <jwillemsen@remedy.nl>

        * modules/BDS4ProjectCreator.pm:
        * modules/BDS4WorkspaceCreator.pm:
          Some more rename of bds to bds4

Wed Dec 20 09:25:13 2006  Johnny Willemsen  <jwillemsen@remedy.nl>

        * modules/BDSProjectCreator.pm:
        * modules/BDSWorkspaceCreator.pm:
        * templates/bds.mpd:
        * templates/bdsdll.mpt:
        * templates/bdsexe.mpt:
          Renamed to bds4, this is for Borland Developer Studio 4

        * config/boost_date_time.mpb:
        * config/boost_filesystem.mpb:
        * config/boost_iostreams.mpb:
        * config/boost_prg_exec_monitor.mpb:
        * config/boost_program_options.mpb:
        * config/boost_regex.mpb:
        * config/boost_serialization.mpb:
        * config/boost_signals.mpb:
        * config/boost_test_exec_monitor.mpb:
        * config/boost_thread.mpb:
        * config/boost_wave.mpb:
        * config/xerces.mpb:
        * docs/MPC.sgml:
        * docs/USAGE:
          Updated bds to bds4

Tue Dec 19 11:37:13 2006  J.T. Conklin  <jtc@acorntoolworks.com>

        * templates/automake.mpd:

          Further whitespace fix so that _SOURCES will be correctly
          terminated.

Tue Dec 19 10:37:10 2006  J.T. Conklin  <jtc@acorntoolworks.com>

        * templates/automake.mpd:

          Fix extra whitespace in generated Makefile.am's to match
          what was generated before multiple configuration support
          was added.

Tue Dec 19 18:02:21 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * templates/automake.mpd:

          Fixed a bug where exe LDFLAGS would be overwritten with the
          LDFLAGS_COMMON even when configurations weren't used.

          Also minimized some of the blank line emissions.

        * templates/vc7.mpd:
        * templates/vc7dll.mpt:
        * templates/vc7exe.mpt:
        * templates/vc7lib.mpt:
        * templates/vc7libexe.mpt:
        * templates/vc8platforms.mpt:

          Unified the intermediate directories for nmake, vc7 and vc8 for
          the various machine types (x86, x64, etc.).

Tue Dec 19 07:41:59 2006  J.T. Conklin  <jtc@acorntoolworks.com>

        * templates/automake.mpd:

          If not building separate configurations, define *_CPPFLAGS,
          *_SOURCES, *_LDFLAGS, etc. directly instead of defining
          *_CPPFLAGS_COMMON, *_SOURCES_COMMON, *_LDFLAGS_COMMON, etc. and
          then defining the former in terms of the latter.  This results
          in generated Makefile.am's closer to what MPC generated before
          configurations support was added (there are some whitespace
          differences that still need to be tracked down), and closer
          to what a hand-written Makefile.am would look like.

Tue Dec 19 03:38:49 2006  J.T. Conklin  <jtc@acorntoolworks.com>

        * templates/automake.mpd:

          Fix conditional nesting in *_LDFLAGS* definition so that an
          empty one isn't emitted.

Tue Dec 19 03:01:22 2006  J.T. Conklin  <jtc@acorntoolworks.com>

        * templates/automake.mpd:

          Move configuration-specific definition for *_DEPENDENCIES
          to immediate follow the definition for *_DEPENDENCIES_COMMON.

Tue Dec 19 02:28:46 2006  J.T. Conklin  <jtc@acorntoolworks.com>

        * templates/automake.mpd:

          Extend conditional around the *_PROGRAMS and *_LTLIBRARIES
          definitions to to include the *_CPPFLAGS*, *_SOURCES*, and
          *_LDFLAGS*.  This fixes Makefile.am generation for projects that
          don't build executables or libraries, such as those that compile
          *.idl files.

Tue Dec 19 02:21:30 2006  J.T. Conklin  <jtc@acorntoolworks.com>

        * templates/automake.mpd:

          Move configuration-specific definitions for *_CPPFLAGS,
          *_SOURCES, and *_LDFLAGS to immediately follow the definitions
          for *_CPPFLAGS_COMMON, *_SOURCES_COMMON, and *_LDFLAGS_COMMON,
          as makes the resultant Makefile.am easier to read, and makes
          it easier to add conditionals that effect both configuration-
          specific and common definitions.

Tue Dec 19 01:29:01 2006  J.T. Conklin  <jtc@acorntoolworks.com>

        * templates/automake.mpd:

          Fix template conditionals around *_LDFLAGS_COMMON definition.
          When "configurations" support was added, this was mangled and
          no definition was emitted for library projects.

Mon Dec 18 13:48:15 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * config/cppunit.mpb:

          Added a comment with a dollar Id.

        * modules/AutomakeWorkspaceCreator.pm:

          Sort the features when creating the configure.ac file for
          repeatability.

        * modules/NMakeWorkspaceCreator.pm:

          Change the workspace extension from .nmak to .mak.  This is only
          used when -make_coexistence is used on the command line.

        * modules/ProjectCreator.pm:

          When checking to see if a feature is enabled, we will now
          explicitly set the feature in the feature parser for later use
          within the AutomakeWorkspaceCreator.

Fri Dec 15 19:38:00 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * config/cppunit.mpb:

          Added a base project for cppunit.  Set the CPPUNIT_ROOT
          environment variable before processing.

        * modules/Creator.pm:
        * modules/ProjectCreator.pm:

          Fixed a few bugs.

          1) If -feature_file was used in a 'cmdline' setting within a .mwc
             file, it was silently ignored.
          2) When setting certain 'cmdline' options within a .mwc file, they
             would persist outside of the scope in which they were set.
          3) If the file specified by -feature_file did not contain a full
             path, it would not be used unless it was in the current
             directory.  The MPC include paths are now searched if it does
             not contain a path.

Thu Dec 14 14:30:58 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * PROBLEM-REPORT-FORM:

          Changed to ask for the Operating System and Shell.

        * modules/Creator.pm:

          When expanding variables, warn the user if the value returned from
          adjust_value() is a hash table.  When this happens, it means that
          a template scope name collides with a variable name contained
          within $().

        * templates/make.mpd:

          Added support to perform a post link processing command.

        * templates/makedll.mpt:

          Added a post link processing command to perform the integrate step
          for Green Hills on Integrity.

Wed Dec 13 17:05:29 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * config/zlib.mpb:

          Modified this base project to use an intermediate template
          variable, zlibname, for Windows based project types.  The default
          remains zlib, but can be overridden on the command line or after
          this base project has been included.  For instance, the dynamic
          version of this library is named zdll and would require that the
          user of such library change the zlibname template variable.

        * modules/Options.pm:

          Provide indication when template variables are set on the command
          line.

          Also, warn users when -value_template is used for a project
          keyword.

        * modules/ProjectCreator.pm:

          Modified the evaluation of template variables such that values set
          on the command line take precedence over those set in projects.

Tue Dec 12 19:46:17 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/MPC.sgml:
        * docs/USAGE:
        * modules/Driver.pm:
        * modules/OutputMessage.pm:
        * modules/Parser.pm:
        * modules/WorkspaceCreator.pm:

          Removed deprecated environment variables.  All functionality
          provided by the environment variables was moved into the MPC
          configuration file long ago.

Tue Dec 12 14:32:51 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/README:
        * modules/ProjectCreator.pm:
        * templates/vc8csharp.mpd:

          Added three new C# specific scoped keywords (dependent_upon,
          generates_source and subtype).  See docs/README for more details.

Mon Dec 11 19:36:13 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * config/yacc.mpb:

          Fixed the postcommand for the custom rule so that both source and
          header file are created correctly.

        * modules/ProjectCreator.pm:

          Fixed a bug where defaults source files for custom definitions may
          result in incorrect file addition if the generated source file is
          not the default extension (.cpp).

Wed Dec  6 18:08:49 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/README:
        * modules/ProjectCreator.pm:
        * templates/em3.mpd:
        * templates/nmake.mpd:
        * templates/vc6.mpd:
        * templates/vc7.mpd:
        * templates/vc8.mpd:

          Added a new source component level setting, no_pch.  When set, it
          specifies that precompiled headers should not be used for the
          source files listed within the scope of it's setting.

Tue Dec  5 03:29:14 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/MPC.sgml:
        * docs/USAGE:
        * modules/Driver.pm:
        * modules/MPC.pm:
        * modules/MWC.pm:
        * modules/Options.pm:
        * mpc.pl:
        * mwc.pl:

          Removed the default project type and simplified the addition of
          new project/workspace creators.  Now, you must specify a type on
          the command line or a default type in the MPC.cfg.

Mon Dec  4 16:02:43 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/Driver.pm:

          If no MPC.cfg exists in MPC/config, search the config path from
          the starting point for mwc.pl (e.g., $ACE_ROOT/bin/mwc.pl).  This
          precludes the removal of $ACE_ROOT/bin/mwc.pl.

        * config/base.cfg:

          Removed this file.  It is no longer necessary to provide the
          search paths for ACE related projects.

Mon Dec  4 15:08:19 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * config/base.cfg:

          Provide default MPC.cfg search paths for ACE related projects.

        * modules/ProjectCreator.pm:
        * modules/TemplateParser.pm:

          Fixed a bug where grouped generated files would be duplicated due
          to a problem matching up the generated files when gendir is set to
          '.'.

Thu Nov 30 15:31:55 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/WorkspaceCreator.pm:

          Fixed bugs where nested scopes and nested workspace aggregation
          would either not use workspace assignments or not have the right
          workspace assignments.  Thanks to James Hill
          <hillj@isis.vanderbilt.edu> for pointing this out.

Wed Nov 29 19:47:15 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/BMakeWorkspaceCreator.pm:
        * modules/MakeWorkspaceBase.pm:
        * modules/MakeWorkspaceCreator.pm:
        * modules/NMakeWorkspaceCreator.pm:

          Factored much of the common code in these workspace types into a
          single base module.

        * modules/BDSWorkspaceCreator.pm:
        * modules/CCWorkspaceCreator.pm:
        * modules/EM3WorkspaceCreator.pm:
        * modules/HTMLWorkspaceCreator.pm:
        * modules/SLEWorkspaceCreator.pm:
        * modules/VC6WorkspaceCreator.pm:
        * modules/VC7WorkspaceCreator.pm:
        * modules/WorkspaceCreator.pm:

          Factored out the workspace_file_name method into the
          WorkspaceCreator.

Wed Nov 29 19:07:38 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/MPC.sgml:
        * docs/USAGE:
        * modules/MPC.pm:
        * modules/MWC.pm:
        * modules/VC8WebProjectCreator.pm:
        * modules/VC8WebWorkspaceCreator.pm:

          Removed the vc8web project type.  It has been replace with the
          'webapp' project keyword in combination with the vc8 projec type.

Wed Nov 29 18:18:54 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/WorkspaceCreator.pm:

          Fixed a bug where an aggregated workspace with scopes (other than
          exclude) would not be parsed properly.  Thanks to James Hill
          <hillj@isis.vanderbilt.edu> for bringing this to my attention.

Wed Nov 29 12:52:04 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * templates/automake.mpd:

          Moved the compile_flags portion out of the CPPFLAGS_COMMON section
          into the specific _CPPFLAGS settings to allow users to put
          compile_flags settings inside the configuration definitions.

Tue Nov 28 17:37:31 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/AutomakeWorkspaceCreator.pm:
        * templates/automake.mpd:

          Added the ability to set 'configurations' (as is done for vc6,
          vc7, etc.) so that different versions of executables and libraries
          can be built from the same Makefile.am.  By default, the
          'configurations' template variable is not set.  Thanks to
          Friedhelm Wolf <Friedhelm.Wolf at homag dot de> for providing the
          automake template modifications.

Mon Nov 27 16:58:31 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/ProjectCreator.pm:

          Convert all output files from custom commands if the project type
          requires slash conversion.

        * templates/vc7csharp.mpd:
        * templates/vc7vb.mpd:
        * templates/vc8csharp.mpd:
        * templates/vc8vb.mpd:

          Made resource files not dependent upon any particular source file.
          Also, re-removed the .aspx support in the vc8 templates.  See the
          modification from Tue Jun 20 12:41:49 UTC 2006.

Wed Nov 22 18:07:56 2006  Steve Huston  <shuston@riverace.com>

        * templates/vc8platforms.mpt: Corrected macros and libs for Smartphone
          WinCE configurations.

Wed Nov 22 20:40:58 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/ProjectCreator.pm:
        * templates/vc8csharp.mpd:
        * templates/vc8vb.mpd:

          Added support for resource files (.resx or .resources) and .aspx
          files for both csharp and vb for the vc8 project type.

Wed Nov 22 19:54:01 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/VC8WorkspaceCreator.pm:

          The adjustment of the website project name wasn't correct.  It
          needed to be the dirname of the project name instead of the
          basename.

Wed Nov 22 19:34:29 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/README:
        * modules/ProjectCreator.pm:
        * modules/VC7ProjectCreator.pm:
        * modules/VC7WorkspaceCreator.pm:
        * modules/VC8ProjectCreator.pm:
        * modules/VC8WebWorkspaceCreator.pm:
        * modules/VC8WorkspaceCreator.pm:
        * modules/WorkspaceCreator.pm:

          Removed the scope keyword, webapp, from the workspace and added a
          new project keyword named webapp.  If webapp is set to 1 in the
          project, it will be considered a Web Application, will not have a
          project file written for it and will be included in the workspace
          all if the project type supports Web Applications.  Currently,
          only the vc8 project type supports them.

Wed Nov 22 13:44:33 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/MPC.sgml:
        * docs/USAGE:
        * modules/Driver.pm:

          Added the ability to set the default type in the  MPC
          configuration file.

        * docs/README:
        * modules/VC7WorkspaceCreator.pm:
        * modules/VC8WebWorkspaceCreator.pm:
        * modules/VC8WorkspaceCreator.pm:
        * modules/WorkspaceCreator.pm:

          Added a new scope keyword, webapp, to allow users to specify web
          application directories.  Any directory specified within a webapp
          scope will be considered as a web application directory.
          Currently only the vc8 project type supports web application
          directories.

        * modules/ConfigParser.pm:

          Disallow empty names within the base configuration file (i.e.,
          $VAR that evaluates to empty).

Wed Nov 22 10:34:12 2006  Johnny Willemsen  <jwillemsen@remedy.nl>

        * modules/BMakeWorkspaceCreator.mpc:
          Give the workspace a .bmak extension when using make_coexistence and
          simplified workspace_file_name()

        * templates/bmake.mpd:
        * templates/bmakecommon.mpt:
          Removed support for the cbx compiler type which was the preview
          compiler shipped with CBuilderX.

Thu Nov 16 13:34:26 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/README:
        * modules/ProjectCreator.pm:

          Added a new feature, Modify_Custom, that can be used to customize
          an existing Define_Custom.

Thu Nov 16 12:25:18 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * config/global.features:
        * config/xalanc.mpb:

          Added support for Xalan-C++.  The xalanc feature is off by
          default.

        * modules/ConfigParser.pm:

          Support shell and make style environment variables.

Fri Nov 10 16:48:14 UTC 2006  Kevin Heifner  <heifner_k@ociweb.com>

        * docs/templates/vc7csharp.txt:
        * docs/templates/vc8csharp.txt:
        * templates/vc7csharp.mpd:
        * templates/vc8csharp.mpd:

          Added a new template variable, 'keyfile', to support assembly
          signing.

Thu Nov  9 13:25:05 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/GHSWorkspaceCreator.pm:

          Removed the -I. from the default project and added
          --one_instantiation_per_object.

Mon Nov  6 19:27:44 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/CCProjectCreator.pm:

          Code Composer checks the timestamp on the project file.  So, we
          need to compare the output to ensure that we don't update a
          project file that doesn't need to be.

        * modules/ProjectCreator.pm:

          Fixed a bug where generated headers, inline files or template
          files would not be automatically added in the event that the user
          provided input for those types (i.e., Header_Files, Inline_Files,
          or Template_Files) that corresponds to a directory.  Now,
          specifying the following:

          Header_Files {
            some_dir_name
          }

          works as if the Header_Files section was not supplied, which is
          equivalent to the following:

          Header_Files {
            .
          }

          This pertains to automatic addition of generated files.

Mon Nov  6 15:11:47 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/ProjectCreator.pm:

          Fixed a bug where unrecognized lines in 'specific' sections would
          not be flagged as an error.

        * modules/StringProcessor.pm (parse_assignment):

          Since template variable scopes can have spaces in the names, we
          must allow scopes to have spaces in the names here as well.

        * modules/Creator.pm:
        * modules/WorkspaceCreator.pm:

          Put quotes around the variable name when displaying an invalid
          assignment name.  This allows spacing to be taken into account.

        * templates/make.mpd:

          The implementation for the 'targetoutdir' template variable was
          incorrect.  'targetoutdir' was not taken into account for the
          'libpaths' setting.

Thu Oct 26 15:45:18 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/templates/common.txt:
        * docs/templates/make.txt:
        * templates/make.mpd:
        * templates/makedll.mpt:

          Renamed the prelink template variable to prelinktarget to avoid
          conflicting with prelink used in other templates.

        * docs/templates/vc7.txt:
        * docs/templates/vc7csharp.txt:
        * docs/templates/vc7vb.txt:
        * docs/templates/vc8csharp.txt:

          Documented the template variables for these existing project types
          and language combinations.

        * docs/templates/vc8vb.txt:
        * modules/VC8ProjectCreator.pm:
        * templates/vc8vb.mpd:
        * templates/vc8vb.mpt:

          Added initial support for Visual Basic with vc8.

        * templates/bmake.mpd:
        * templates/nmake.mpd:

          Support the prelink template variable as is done in vc7 and vc8.

        * templates/vc7.mpd:

          Modified the template to use PreprocessorDefinitions for
          midl_defines under the VCMIDLTool section instead of
          AdditionalOptions.

        * templates/vc7csharp.mpd:
        * templates/vc7csharp.mpt:
        * templates/vc7vb.mpd:
        * templates/vc7vb.mpt:
        * templates/vc8csharp.mpd:
        * templates/vc8csharp.mpt:

          Changed the way the 'trace' template variable worked to be
          consistent between both vb and csharp with vc7 and vc8.

Thu Oct 19 17:29:08 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/GHSWorkspaceCreator.pm:

          Modified to create an integrate file (for Integrity projects) and
          use it during the integration step.

Mon Oct 16 13:33:46 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/AutomakeWorkspaceCreator.pm:
        * modules/BDSWorkspaceCreator.pm:
        * modules/BMakeWorkspaceCreator.pm:
        * modules/EM3WorkspaceCreator.pm:
        * modules/HTMLWorkspaceCreator.pm:
        * modules/MakeWorkspaceCreator.pm:
        * modules/NMakeWorkspaceCreator.pm:
        * modules/VC6WorkspaceCreator.pm:
        * modules/VC71WorkspaceCreator.pm:
        * modules/VC7WorkspaceCreator.pm:
        * modules/VC8WorkspaceCreator.pm:

          Use the create_command_line_string() method instead of printing
          the command line directly.  This opens the door for disabling this
          functionality.

        * mpc.pl:
        * mwc.pl:

          Removed the unused Config module.

        * templates/makedll.mpt:

          For wrsppc, wrspentium, and ghsppc compilers, use $(CPUTYPE)
          instead of hard-coding the processor type.

        * templates/vc8.mpd:

          Remove the 'output_subdir' template value from all library and
          executable output paths.

Wed Oct  4 17:08:21 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/GHSWorkspaceCreator.pm:

          For Integrity, a bsp file can not be added to the "Program"
          project, it must be added to the "INTEGRITY Application" project.
          So, for the ghs project type only, add .bsp files as documentation
          in the project and the bsp documentation files will be added as bsp
          files  when the integrate project is created.

Tue Oct  3 11:38:34 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/Creator.pm:
        * modules/ProjectCreator.pm:
        * modules/WorkspaceCreator.pm:

          Factored out the relative replacement code from the ProjectCreator
          into the Creator.  This required the addition of two template
          methods to get different sets of data for relative replacement to
          maintain the same functionality in the ProjectCreator and similar
          functionality in WorkspaceCreator.

        * modules/TemplateParser.pm:

          Fixed a bug where a previous scope of a foreach would hang around
          even when the scope went away.  This could cause strange results
          when nesting foreach's.

Tue Sep 26 21:02:46 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/templates/bmake.txt:

          Documented the template variables used by the bmake template.

        * templates/automake.mpd:
        * templates/bmake.mpd:
        * templates/em3.mpd:
        * templates/make.mpd:
        * templates/nmake.mpd:
        * templates/vc6.mpd:
        * templates/vc7.mpd:
        * templates/vc7csharp.mpd:
        * templates/vc7vb.mpd:
        * templates/vc8.mpd:
        * templates/vc8csharp.mpd:

          If a custom definition has an 'output_option' set, the order of
          listing the input file changes such that it is listed before the
          output_option setting in the build rule.

Tue Sep 26 11:49:52 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * devtools/document_template.pl:

          Fixed bugs where complex foreach's (with functions) would not be
          recognized and default template variable values would be
          lowercased.

        * docs/README:

          Clarified the 'exclude' usage.

        * docs/USAGE:
        * docs/templates/cc.txt:
        * docs/templates/common.txt:
        * modules/CCProjectCreator.pm:
        * modules/CCWorkspaceCreator.pm:
        * modules/MPC.pm:
        * modules/MWC.pm:
        * modules/ProjectCreator.pm:
        * modules/WorkspaceCreator.pm:
        * templates/cc.mpd:
        * templates/cccommon.mpt:
        * templates/ccexe.mpt:
        * templates/cclib.mpt:

          Added complete support for Code Composer 2.0.  This is an embedded
          application IDE for Windows only.

Fri Sep 22 14:00:10 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/GHSWorkspaceCreator.pm:
        * docs/templates/ghs.txt:
        * templates/ghs.mpd:
        * templates/ghscommon.mpt:

          Fixed a couple of issues:

          1) Exceptions were hard-coded to be on for all projects.  It is
             now controlled by the 'exceptions' template variable and is on
             by default.
          2) If the primary target is Integrity, Program projects need an
             intermediate INTEGRITY Application project to perform the
             integration properly.

        * modules/TemplateParser.pm:

          Fixed a bug where getting the default value of a template variable
          was not case-insensitive as it should have been.

Wed Sep 20 16:26:48 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * config/bison.mpb:
        * config/flex.mpb:
        * config/lex.mpb:
        * config/yacc.mpb:

          Added a 'requires' setting for each base project matching the file
          name (e.g requires += bison in bison.mpb).

        * config/ziparchive.mpb:

          Removed an extraneous comment.

        * templates/ghs.mpd:

          Changed the default primaryTarget to ppc_integrity.tgt and added
          <%exe_ext%> to <%exename%>.

Tue Sep 19 13:04:15 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/MPC.sgml:
        * docs/USAGE:
        * docs/templates/ghs.txt:
        * modules/GHSProjectCreator.pm:
        * modules/GHSWorkspaceCreator.pm:
        * modules/ProjectCreator.pm:
        * modules/TemplateParser.pm:
        * templates/ghs.mpd:
        * templates/ghscommon.mpt:

          Modified the ghs project type to support the 4.x version of the
          Multi IDE.  With this, the old .bld format has been removed.  This
          version assumes that Multi is being run on Windows.  If this is
          not the case, set the MPC_GHS_UNIX environment variable.

        * config/mfc.mpb:

          Used an else on the subsystem specific section instead of
          explicitly listing out the later versions of Visual C++.  When vc9
          is released, this file may not need to be modified.

        * config/openssl.mpb:

          Added nmake to the section related to Visual C++.

        * devtools/document_template.pl:

          Fixed a bug where template parser functions were seen as template
          variables to be documented.

        * docs/README:

          Clarified how the value for 'pure_libs' is interpreted.

        * templates/makedll.mpt:

          Updated support for the GHS compiler.

Wed Sep 13 15:24:45 UTC 2006  Phil Mesnier  <mesnier_p@ociweb.com>

        * templates/em3.mpd:
          Fix typo in the base address supplied to the linker. This is
          necessary to debug WinCE applications.

Wed Sep  6 16:20:27 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/ProjectCreator.pm:

          Backward compatibility was not complete for the 'install' keyword
          when scoped in a specific section.  The resolve_alias() method did
          not take scoping into account.

Thu Aug 31 23:18:57 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * devtools/document_template.pl:

          Fixed a bug where variables found within a <%if()%> were not taken
          into account.

        * docs/templates/common.txt:

          Added some missing common template variable definitions.

        * docs/templates/make.txt:

          Defined all of the template variables specific to the make
          template.

        * modules/ProjectCreator.pm:

          Fixed a bug where target output directories (exeout, dllout,
          libout) were not escaped if they included spaces.

        * templates/make.mpd:
        * templates/makedll.mpt:

          Renamed dependencies to suppports_include which indicates whether
          a native version of make supports including files the may not
          exist at the time of make invocation.

        * templates/bmake.mpd:
        * templates/em3.mpd:
        * templates/ghs.mpd:
        * templates/nmake.mpd:
        * templates/sle.mpd:
        * templates/vc6.mpd:
        * templates/vc7.mpd:
        * templates/vc8.mpd:

          Fixed a bug where the lib modifier was still applied to libraries
          specified by the 'libs' project variable even if the
          'use_lib_modifier' template variable was unset.

        * templates/bmakedll.mpt:
        * templates/bmakedllexe.mpt:
        * templates/bmakelib.mpt:
        * templates/bmakelibexe.mpt:
        * templates/common.mpt:
        * templates/em3vcpdll.mpt:
        * templates/em3vcpdllexe.mpt:
        * templates/em3vcplib.mpt:
        * templates/em3vcplibexe.mpt:
        * templates/nmakedll.mpt:
        * templates/nmakeexe.mpt:
        * templates/sledll.mpt:
        * templates/sleexe.mpt:
        * templates/vc6dspdll.mpt:
        * templates/vc6dspdllexe.mpt:
        * templates/vc6dsplib.mpt:
        * templates/vc6dsplibexe.mpt:
        * templates/vc7dll.mpt:
        * templates/vc7exe.mpt:
        * templates/vc7lib.mpt:
        * templates/vc7libexe.mpt:
        * templates/vc8dll.mpt:
        * templates/vc8lib.mpt:

          Factored out the 'use_lib_modifier' and 'use_exe_modifier'
          template variables into common.mpt.

Mon Aug 28 12:09:16 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/MPC.sgml:
        * docs/README:
        * docs/USAGE:
        * modules/Options.pm:

          Updated incorrect documentation and added missing information.

        * modules/Driver.pm:

          Added a warning about the impending default type removal when no
          type is specified.

        * templates/make.mpd:

          Added the ability to force object files into a specific directory
          and added the ability to provide a "make include" file to override
          or augment makefile rules.

        * templates/vc7.mpd:
        * templates/vc8.mpd:

          Converted whitespace to tabs as Visual Studio would used.

Mon Aug 21 09:12:12 UTC 2006  Johnny Willemsen  <jwillemsen@remedy.nl>

        * modules/ProjectCreator.pm (get_command_subs):
          Added crlf to the list, this can then be used in for example the
          prelink to have a multiline command. Thanks to Kees van Marle
          <kvmarle at remedy dot nl> for adding this.

Sat Aug 19 17:50:12 UTC 2006  Johnny Willemsen  <jwillemsen@remedy.nl>

        * templates/vc7.mpd:
        * templates/vc8.mpd:
          Added prelink as template variable, thanks to Kees van Marle
          <kvmarle at remedy dot nl> for adding this.

Sat Aug 19 01:22:51 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/MPC.sgml:

          Added this SGML document provided by Thomas Girard.  It contains
          information similar to that which is found in the USAGE file.

        * docs/USAGE:
        * modules/Options.pm:

          Cosmetic changes to the usage output.

        * modules/Driver.pm:

          Fixed a bug where an MPC configuration file that didn't exist
          would be chosen from the code base configuration file.

Wed Aug 16 22:22:31 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/USAGE:

          Added information to the logging section about the debug setting.

        * modules/WorkspaceCreator.pm:
        * modules/WorkspaceHelper.pm:

          Added a method, perform_custom_processing, to WorkspaceHelper to
          allow users to be able to inject data into the workspace.

Tue Aug 15 23:50:48 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/USAGE:

          Fixed a minor typo.

        * modules/NMakeWorkspaceCreator.pm:

          Prefix the calls to cd with @ so that they are not printed during
          a make.

        * docs/README:
        * modules/Creator.pm:
        * modules/Options.pm:
        * modules/ProjectCreator.pm:
        * modules/StringProcessor.pm:
        * templates/bmake.mpd:
        * templates/em3.mpd:
        * templates/ghs.mpd:
        * templates/html.mpd:
        * templates/make.mpd:
        * templates/nmake.mpd:
        * templates/sle.mpd:
        * templates/vc6.mpd:
        * templates/vc7.mpd:
        * templates/vc7csharp.mpd:
        * templates/vc7vb.mpd:
        * templates/vc8.mpd:
        * templates/vc8csharp.mpd:

          Deprecated the 'install' keyword.  It has been replaced with
          'exeout' to be consistent with 'dllout' and 'libout'.  The use of
          'install' will still be accepted.

Wed Aug  9 15:11:23 2006  Chris Cleeland  <cleeland_c@ociweb.com>

        * modules/ProjectCreator.pm (expand_variables):

          Corrected a problem where "pre/" and "post/" include slashes
          were being changed to have the wrong type of slash.

Wed Aug  9 01:14:54 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * devtools/document_template.pl:

          Corrected a bug where multiple variables used within a <%foreach%>
          would not be recognized correctly.

        * docs/USAGE:

          Clarified the documentation dealing with the MPC configuration
          files.

        * modules/AutomakeWorkspaceCreator.pm:

          Print out AM_CONDITIONAL's for all of the features known to the
          FeatureParser.

        * modules/BMakeWorkspaceCreator.pm:
        * modules/NMakeWorkspaceCreator.pm:

          Fixed a bug where an assumption is made that projects in different
          directories were assumed to be relative.  When absolute
          directories are used, the Makefile would get confused about how to
          get back to the original directory.

        * modules/Driver.pm:

          Compare directories case-insensitively when running on a system
          that does not support case-sensitive file systems while searching
          for the correct MPC.cfg.

        * modules/Creator.pm:
        * modules/DirectoryManager.pm:
        * modules/Options.pm:
        * modules/ProjectCreator.pm:
        * modules/StringProcessor.pm:
        * modules/WorkspaceCreator.pm:

          Factored out and simplified code dealing with parsing assignments.

        * templates/nmake.mpd:

          Corrected information about getting a dependency generator for
          nmake.

Thu Aug  3 02:45:12 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/templates:
        * docs/templates/common.txt:
        * devtools/document_template.pl:

          The script can be used to document all template variables found
          within a project template (.mpd file).  Currently, only the
          template variables that are common to most templates are
          documented.

        * modules/ProjectCreator.pm:
        * modules/TemplateParser.pm:

          Added methods to get keywords for use within the devtools scripts.

        * highlight_template.pl:
        * devtools/highlight_template.pl:

          Moved this file into the devtools directory.

Fri Jul 28 15:13:01 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * modules/ProjectCreator.pm:

          Corrected a bug introduced by my change from Fri Jul 14 17:25:16
          UTC 2006.  The original change was intended to deal with Windows'
          inability to have empty environment variables.  I have changed it
          to have a special case where then environment variable value of ""
          is interpreted as the users intent to have an empty string.

Wed Jul 26 22:35:28 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * docs/LICENSE:
        * docs/README:
        * docs/USAGE:

          Moved these files from the root directory into the newly created
          docs directory.

        * modules/TemplateParser.pm:
        * templates/automake.mpd:

          Added a new template function, keyname_used, that is used in the
          automake template to handle the situation where a custom input
          file is used with more than one custom defined type.  If the
          custom input file caused more than one file to be generated in
          each custom defintion, the stamp file would be duplicated causing
          build errors.

Tue Jul 25 15:36:29 UTC 2006  Chad Elliott  <elliott_c@ociweb.com>

        * MPC version 3.4.0 released.

Local Variables:
add-log-time-format: current-time-string
indent-tabs-mode: nil
End:
